Jump to content

Samurai Shodown V Special


sammaz

Recommended Posts

The Phantom,Sep 26 2004, 09:55 PM]
I am now learning how to use Enja.

Anyone know the finishing command for the move where he hit the opponent to the sky and crash them down? QCF + A, QCF + B, QCF + C...then??

When you do QCF+C, u must make sure the first "fist" hits in exactly the middle spot of the opponenet, around the stomach.

 

Watch the SP computer do it - 100% timing.

 

The timing is very hard, so don't get frustrated if you do it for the whole day and get like one success.

 

 

Also, learn his practical moves as well. Dash C - Big Pursuit is simple but does a lot of damage. You can do a counter BC and combo it with standing AB.

 

When facing human opponents, dash A - CD grab is a very good pattern as well.

 

Forward Roll - Explosion substitution move is a very good pattern against characters that have short attack ranges.

 

 

Enja is a pro character, and you will have a very hard time trying to get through characters that have fast, long moves (i,e, charlotte, tam tam, even Yunfei and such).

Thanks for the advice, Phantom and ugenn. I only have problems facing characters such as Zankuro or Suija. This character rocks!

Rage MAX : Jump B, B, qcf+A, qcf+B, qcf+C ; 80% of life!!!!

Link to comment
Share on other sites

  • Replies 478
  • Created
  • Last Reply

Top Posters In This Topic

You can stop asking now. Once it's found, it will be posted in a new topic.

Uhmm.. New topic? :P

It'll probabaly be in this topic as welll since this is the official thread. But please, stop asking till it's out. I'll make an announcement once the game is fully playable. :P

Link to comment
Share on other sites

You can stop asking now. Once it's found, it will be posted in a new topic.

Uhmm.. New topic? :lol:

It'll probabaly be in this topic as welll since this is the official thread. But please, stop asking till it's out. I'll make an announcement once the game is fully playable. :crybaby:

That's why I have a new closed Pinned topic :kramer2: for when it is fully released.

Link to comment
Share on other sites

Ok, the vconv thing is not working for me.

 

I make use the vconv which makes the v1d, v2d,v3d,v4d. Ok, so I take my bad sound rom and delete their v roms and put these things in instead. Now none of my emulators read it.

 

I have a copy of the original, but it doesn't seem like working. I tried merging but I get the same results.

 

What am I doing wrong here?

Link to comment
Share on other sites

The Phantom,Sep 29 2004, 02:55 PM] Ok, the vconv thing is not working for me.

 

I make use the vconv which makes the v1d, v2d,v3d,v4d. Ok, so I take my bad sound rom and delete their v roms and put these things in instead. Now none of my emulators read it.

 

I have a copy of the original, but it doesn't seem like working. I tried merging but I get the same results.

 

What am I doing wrong here?

what I did was run vconv on them then rename them to what they used to be called. It worked fine for me.

Link to comment
Share on other sites

The Phantom,Sep 29 2004, 04:55 AM] Ok, the vconv thing is not working for me.

 

I make use the vconv which makes the v1d, v2d,v3d,v4d. Ok, so I take my bad sound rom and delete their v roms and put these things in instead. Now none of my emulators read it.

 

I have a copy of the original, but it doesn't seem like working. I tried merging but I get the same results.

 

What am I doing wrong here?

What emu are you using? You might need to update the CRCs/SHA checksums.

Link to comment
Share on other sites

I have this complete 100% good encrypted rom set:

 

272-p1.bin 4mb CRC: 9291794D

272-p2.bin 4mb CRC: FA1A7DD8

272-c1.bin 8mb CRC: 4F97661A

272-c2.bin 8mb CRC: A3AFDA4F

272-c3.bin 8mb CRC: 8C3C7502

272-c4.bin 8mb CRC: 32D5E2E2

272-c5.bin 8mb CRC: 6CE085BC

272-c6.bin 8mb CRC: 05C8DC8E

272-c7.bin 8mb CRC: 1417B742

272-c8.bin 8mb CRC: D49773CD

272-m1.bin 512kb CRC: ADEEBF40

272-v1.bin 8mb CRC: 76A94127

272-v2.bin 8mb CRC: 4BA507F1

 

On what [if any] emus does this run?

Edited by Class316
Link to comment
Share on other sites

I have this complete 100% good encrypted rom set:

 

272-p1.bin 4mb CRC: 9291794D

272-p2.bin 4mb CRC: FA1A7DD8

272-c1.bin 8mb CRC: 4F97661A

272-c2.bin 8mb CRC: A3AFDA4F

272-c3.bin 8mb CRC: 8C3C7502

272-c4.bin 8mb CRC: 32D5E2E2

272-c5.bin 8mb CRC: 6CE085BC

272-c6.bin 8mb CRC: 05C8DC8E

272-c7.bin 8mb CRC: 1417B742

272-c8.bin 8mb CRC: D49773CD

272-m1.bin 512kb CRC: ADEEBF40

272-v1.bin 8mb CRC: 76A94127

272-v2.bin 8mb CRC: 4BA507F1

 

On what [if any] emus does this run?

Well you can't use that rom with the encrypted M1 on any emulator except for MAME...and you need to know how to get it to work which I don't.

 

So till the decrypted M1 is released, I'm just using the M1 and V roms from Samurai Showdown 5 (270-xxx). And I've gotten it to work in Nebula and Kawaks. And other people have gotten it work in FBA and MAME.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...