philipsmsx Posted March 3, 2011 Posted March 3, 2011 It is possible to have a list of the games added to Final Burn Core?
autopilot Posted March 4, 2011 Posted March 4, 2011 I have a similar setup with a PVM. You should try outputing VGA from the XBOX and use an Extron Emotia to convert the 480p signal to 240p. Check out this site, I really think you would enjoy it: Which Extron do you use. I see Super and Super GX. Is there a preferred model to use? thanks
cmekki Posted March 4, 2011 Posted March 4, 2011 fumanchu: whats the needed files to get DoDonPachi Dai-Ou-Jou (Black Label) working, i get rom error? DoDonPachi Dai-Ou-Jou same?Ketsui: Kizuna Jigoku Tachi is working.Martial Masters has the same rom error?ESP Ra.De. and EspGaluda is working?? EspGaluda and DoDonPachi Dai-Ou-Jou is from the same driver, should not DD Work when Esp work?
BritneysPAIRS Posted March 4, 2011 Author Posted March 4, 2011 ddp3 has issues...not sure why untill I can test it I cant fix it.... martial maters wont run and KOV2 wont run.... only ketsuiespgaludaall cps3 work except for sfiii3 which will need vm added.... ill get around to it at some time im sure im a bit busy with the new pack and the Girl Friend at present....
cmekki Posted March 4, 2011 Posted March 4, 2011 BP: fumanchu ask me to test this games in CoinOPS R6? oki they dont work then....BP: you ask me to test sf3, have rom error there to??? im a xbox 128MB user so i dont need the vm for sf3? or do i?
BritneysPAIRS Posted March 4, 2011 Author Posted March 4, 2011 you need to test these DRIVER( jojoan ) // NO CD VERSIONDRIVER( jojon ) // NO CD VERSIONDRIVER( jojoban ) // NO CD VERSIONDRIVER( Jojobane ) // NO CD VERSIONDRIVER( redeartn ) // NO CD VERSIONDRIVER( sfiii2n ) // NO CD VERSIONDRIVER( sfiii3n ) // NO CD VERSION (WILL PROBABLY GIVE YOU OUT OF MEM AND WILL NEED VM ) sf3 is sorted out another way at present and is fine for 64meg xbox These should work and need to know the speed theres alot more added than just these in recent months but thats what the pack will be about
cmekki Posted March 4, 2011 Posted March 4, 2011 BP: just a noob question, what files do i need to test? and where to put them, sorry again for the noob question
BritneysPAIRS Posted March 4, 2011 Author Posted March 4, 2011 jojoan.zipsfiii2n.zipsfiiin.zip etc into CoinOPS/Roms then rescan.... then all cps3 games will show just testing sfiii2n.zipredeartn.zip will tell me what i need to know and see if they play ok....and at a good speed
cmekki Posted March 4, 2011 Posted March 4, 2011 BP: is there a way to log statistics from the running game i start so it will provide you with all the info? because what i see and feel isnt always perfect
fumanchu Posted March 4, 2011 Posted March 4, 2011 there seems to be a rpobel at the moment with dodonpach idai ou jou black lable rom,here is some more info.http://shmups.system11.org/viewtopic.php?f=1&t=35309 but there is a mdified/hacked version of the rom.@cmekki check your pm box,i am going to upload both these roms(dodonpachi dai ou jou and the black lable hacked version) and will give you a link to download them and try.
emphatic Posted March 4, 2011 Posted March 4, 2011 there seems to be a rpobel at the moment with dodonpach idai ou jou black lable rom,here is some more info.http://shmups.system11.org/viewtopic.php?f=1&t=35309 That's an unrelated discussion on if it's possible to switch roms on an Arcade PCB to change a rather cheap ESPGALUDA into an expensive DOJ BL or Ketsui.
JLsoft Posted March 5, 2011 Posted March 5, 2011 In a future update, can the older MAME cores used for the Midway MK/NBA Jam games be edited to turn off the Soften & Flicker filters?
PhilExile Posted March 5, 2011 Posted March 5, 2011 (edited) Well, that depends on your setup. Usually, the Super GX Emotias do YUV (component) output as well, so that's preferred for some people since that's on most modern TVs. If you are using a production video monitor, RGBs is the way to go and any Emotia will output that. Some of the later Emotia models do NOT enable 240p from 480p sources, so post here before you buy something. Also, another tricky thing is getting one with a working PSU (power supply unit). A lot of times on eBay they are sold without - which makes them useless. No power = no scanlines. Personally, I have a Super Emotia GX and an Emotia Plus in storage in case that one ever bites the dust. Do you have a video monitor to hook this up to? I have a similar setup with a PVM. You should try outputing VGA from the XBOX and use an Extron Emotia to convert the 480p signal to 240p. Check out this site, I really think you would enjoy it: Which Extron do you use. I see Super and Super GX. Is there a preferred model to use? thanks Edited March 5, 2011 by PhilExile
swinging udders Posted March 5, 2011 Posted March 5, 2011 I need a bit of help setting up console games. I have managed to get both megadrive and xbox games to show (all i've tried so far) in the menu, however when I attempt to launch the Megadrive games it goes to black screen for a short time before returning to the menu.With xbox games, it takes me back to evox i'm pretty sure I have followed the instructions correctly, but I have obviously done something wrong. Megadrivegames are zipped, placed in roms folder, renamed as per the .txt, rescanned games, games show but don't launch XBOXgames in root/games folder, used xbox shortcut app pointing to the default.xbe, created empty txt file, renamed to .zip, both named as per the .txt, transferred to coinops roms folder, rescanned games, xbox games show in list but don't launch. what am I going wrong? once I have this sussed my xbox will be going in a cab and will launch directly to coinops, it's the perfect launcher!! thanks!!
Recommended Posts