Jump to content

Recommended Posts

Posted (edited)
The Rc report i have above is the most complete set as of now i think, only two games are not playable yet and the Sf games are just a dat error and should run fine from what Prican says but i have not tried it yet

 

 

Actually, ssf2tbr1 won't run because it's it doesn't have all the necessary XOR tables.

 

Also, notice how ssf2tb and ssf2tbr1 have these two ROMS in common:

 

ssfex.5t (3ae42ff3)

ssfex.7t (4d51f760)

 

I think the DAT error PRican is referring to is the fact that Romcenter will list those two ROMS as missing even if you have them... you should have both those ROMS if you got the update from the usual place, but RC still shows them as missing.

Edited by Thraxen
  • Replies 638
  • Created
  • Last Reply

Top Posters In This Topic

Posted

I'm just wondering what the missing 8 Neogeo games are (278 of 286) from using Prican's post. ie I'm trying to find out if they are known missings or there's something I may not have done when replacing my previous set.

 

Many thanks to Prican for the post, I was missing loads of files before hand!!!

Posted
I'm just wondering what the missing 8 Neogeo games are (278 of 286) from using Prican's post. ie I'm trying to find out if they are known missings or there's something I may not have done when replacing my previous set.

 

Many thanks to Prican for the post, I was missing loads of files before hand!!!

 

 

If PRican maintains his set the same way I do then you are likely "missing" ROMS like kof2002d. I have the the ROMS for kof2002 (fully encrypted) and kof2k2nd (fully decrypted), but do not keep a seperate kof2002d because it is simply a half-way point between kof2002 and kof2k2nd. If you want to create a seperate kof2002d then all the ROMS to do so are in the other two.

Posted
If PRican maintains his set the same way I do then you are likely "missing" ROMS like kof2002d.  I have the the ROMS for kof2002 (fully encrypted) and kof2k2nd (fully decrypted), but do not keep a seperate kof2002d because it is simply a half-way point between kof2002 and kof2k2nd.  If you want to create a seperate  kof2002d then all the ROMS to do so are in the other two.

 

Cheers Thraxen, appreciated...

Posted

nor sure what games would be missing as romcenter listed all fine except those that are unreleased, i did inculde all versions on neogeo games (d, nd and such).

 

romcenter for me states the following under report: You are missing 4 of 672 known FBA-XXX Pro ROMS

 

jgokushi

ms5pcb

ssf2tb

ssf2tbr1

 

2 by an error on the dat, 1 incomplete (ms5pcb) and 1 that isn't released (jgokushi)

 

You are missing 19 roms (4 games) of 12890 known FBA-XXX Pro roms (672 games)

 

jgokushi (all roms)

  majjx.03 (00000000)

  majj.03 (4614a3b2)

  maj-simm.01c (ba0fe27b)

  maj-simm.01d (2cd141bf)

  maj-simm.01a (e29e4c26)

  maj-simm.01b (7f68b88a)

  maj-simm.03c (3aaeb90b)

  maj-simm.03d (97894cea)

  maj-simm.03a (ec737d9d)

  maj-simm.03b (c23b6f22)

  maj.01 (1fe8c213)

  maj-simm.05a (4cb79672)

  maj-simm.05b (e5f2e14a)

ms5pcb

  268-p1r.bin (fc4e18b6)

  268-p2r.bin (216b559a)

ssf2tb

  ssfex.5t (3ae42ff3)

  ssfex.7t (4d51f760)

ssf2tbr1

  ssfex.5t (3ae42ff3)

  ssfex.7t (4d51f760)

Posted

sorry if this is a dumb question.

i am trying to make a fba-xxx set that will fit on a single layer dvd, i got the "fba-xxx pro romset update v1.12" post which is about 5.3GB so I am wondering if there is a list of non-working and/or hacked versions of games that I could remove to keep the set as complete as possible with the real versions of games but still fit on a single layer DVD? any help would be appreciated

Posted

to make it fit a dvd5 disc, i suggest you keep the neogeo d/nd sets and get rid of the main parents but make sure that the other rom got what is needed from the parent rom especially for d sets case.

Posted
Good news team xxx is back, thank the heavens Gogo(at least i think) is back on the job. New surreal and KIXXX

 

It doesn't necessarily mean there will be an update to fbaxxx, for the moment I'll be concentrating on surreal I guess, and I find fbaxxx perfect as it is :P.

Posted
It doesn't necessarily mean there will be an update to fbaxxx, for the moment I'll be concentrating on surreal I guess, and I find fbaxxx perfect as it is :P.

I agree. It's very hard to see how the emulator itself could be improved upon. FBA-XXX is an amazing achievement. :)

Posted (edited)
[i agree. It's very hard to see how the emulator itself could be improved upon. FBA-XXX is an amazing achievement.  ;)

I totally agree, FBA-XXX its amazing, i stopped playing neogeo and cps2 on my PC, now its only FBA-XXX Pro.

by the way, + T +, i would really want to see 720p implemented on fba-xxx pro, the reason its that in my case i have a 720p native display and a samsung dlp, and the upscaling process the tv does from 480p to 720p its causing a delay, i have get used to play with the delay, but it will be great to just eliminate it, i even buyed an iScan HD+, to replace the upsacaling the tv does, and let the iScan do it, and it helped, but there is still a delay of 3 or 4 frames and for fighting games it sucks, so 720p its something I would really, really appreciate.

thanks in advance + T +

Edited by modinside
Posted

ok guys, got a friend of mine that has a x-arcade stick and he knows theres a configuration for it but he wants to know if theres a way to get back to the menu/rom list with it?

Posted
ok guys, got a friend of mine that has a x-arcade stick and he knows theres a configuration for it but he wants to know if theres a way to get back to the menu/rom list with it?

 

 

I have a similar setup in my boXcade cabinet. It uses the x-arcade development board...essentially it's the same as your friends. FBA-XXX was built with the x-arcade in mind.

 

1st change the controller setup in player one from analog to x-arcade (in the setup menu via X and then use the analog to move right for player 1...it will change from analog to x-arcade)

 

Then, after you start a game, to get back to the main menu (and exit the game) press both right & left trigger buttons. You can also customize the mapping of the buttons in setup, but I use the default x-arcade setup.

 

checkout the controller layout pic. The L & R black buttons.

http://fp1.centurytel.net/retroarcade/box_control.htm

 

-djohng :clapping:

http://fp1.centurytel.net/retroarcade/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...