Robert

Amiga emulator >> Get it HERE.

GBA/NDS emulator >> Get it HERE (at bottom of page).

No, I meant coming to your place. I have a spare 2513. I have a bunch of spare chips somewhere, could be a 81LS95 there, who knows. It's a pity you don't have the lowercase kit, then you wouldn't need the 2513.

PSX emulator >> Get it HERE (bottom of page).

If you're using IC sockets they will very likely be causing problems. Check the voltages both at the pin and on the board to be sure. I have the EA article but it's exactly the same as the Assembly Manual. Perhaps we need to organise a visit sometime, I have a spare Assembly Manual.

The Assembly Manual comes with the kit, and therefore has no part number of its own. It has the kit's part number, K-3600. The other books I have are: * Monitor Handbook * B-3606 Dick Smith's First Book of Super 80 Programs * Software for the Super-80 Computer * The assembly manual for the Printer Interface Here's my complete list of Dick Smith part numbers: K3600 SUPER 80 COMPUTER KIT K3601 COMPUTER KEYBOARD K3602 TAPE BASIC K3603 OPTIONAL IC SOCKET PACK K3604 ROM BASIC K3606 S100 EXPANSION KIT K3607 SUPER 80 DELUXE CHARACTER GENERATOR K3610 PRINTER INTERFACE FOR THE SUPER 80 B3600 SUPER 80 TECHNICAL MANUAL B3602 SUPER 80 BASIC HANDBOOK B3606 FIRST BOOK OF SUPER 80 PROGRAMS H2515 MOULDED PLASTIC CASE FOR THE TRANSFORMER H3200 SUPER 80 CASE H8402 SUPER 80 CIRCUIT BOARD M2325 TRANSFORMER A2461 MOLEX CONNECTOR FOR TRANSFORMER SECONDARY P4160 16-PIN SOCKET FOR RAM X1186 16K EXPANSION RAM X3607 HORSE RACE GAME X3790 DEBUG-80 SUPER-80 DEBUGGER DISASSEMBLER X3791 EDIT-80 SUPER-80 EDITOR ASSEMBLER X3792 DUNGEON DILEMMA GAME

Yes that is a very good article, anyone with a new forum should read it. Now that HostelGaming can see where he's gone wrong, I'm closing this. Take note of this quote from the Board Rules Any more spam and action will be taken.

Another spam thread. Any more stuff promoting your site Raelian1 and you can say bye bye. Religion sux and causes more division in this world than anything else and we don't need it here.

Warm is norm, hot is not. If the test mode fails to work, you will have to check the voltages and waveforms on the Z80 and the eproms. The test mode is described in the Technical Manual on pages 31 and 32, although it's not referred to as the test mode. I don't know if you have the Assembly Manual, if you do, read page 19. The required modification for 2532 eproms is listed on page 2 of Appendix F of the Technical Manual, and page 16 of the Assembly Manual. Look at the bottom of the board, under U26 (monitor rom), and if you can see a cut track then it's already done. The other mod, involving some extra ICs, is detailed on page 14 of the Assembly Manual. edit: oops, i forgot to welcome you to 1emulation!!

Amiga emulator for the PSP >> Get it HERE.

I can see it. You have 48k ram with 12k of roms, that is good. I would say that the characters probably are "?", that makes more sense. OK, now for the dipswitches. (0 = closed, 1=open, X=don't care) A B C D 1 0 X X TEST PAGE 3E 1 1 X X TEST PAGE C0 0 0 X X START IN BASIC 0 1 X X START IN MONITOR X X 1 1 16K RAM X X 0 1 32K RAM X X X 0 48K RAM You can set the RAM switches to any position if you think there might be some faulty ram. The test mode does not use any RAM, it only uses the monitor rom. What happens is that the screen, the relay and the LED will turn on and off at a slow rate (4 secs and 8 secs). When you installed the 2532 eproms, did you cut the track as needed? There is a recomended modification involving a couple of extra ICs. Once you get the machine to boot up, you should add the modification.

MAMEinfo.dat MAME32qa AGEMAME patches Catlist SDLMAME Info.dat DDEmeMame 0.37b16.52(2006.11.05) MAME32FX

SMS/GG emulator for Windows and Linux >> Get it HERE (Only windows binary available now).

http://mamedev.org/

Not really creepy, but while I was at my new house last week, I was still there at night time, and I happened to open a window and I could hear this munching noise right outside. There was no moon (cloudy) and all I could make out was this vague black shape that very slowly moved away, munching all the while. I was thinking, what the hell is it?? I was about to leave in a few minutes anyway, so I backed the car around that part of the house and I could see it was a big black wombat. Nothing to worry about at all! It ran down the driveway, out the gate and jumped into a drainage ditch just outside. I closed the gate on the way out. Hopefully that wombat doesn't get run over some time, they have an unfortunate habit of wandering onto roads and they can get quite large.

Not here either. For us it's just another day. One year some kids came around and said "Trick or treat", and I said Trick. That freaked them out and they didn't know how to respond.

I agree, it didn't make much sense to me.

It's a bit hard to choose when there's not much info available, especially the PS3. The wii sounds good from what i've heard, especially if it plays nes/snes stuff (bad for the emulation community tho). If the PS3 turned out to be desirable, i would steal one and not give Sony the satisfaction of getting my money.

The screen wiggling is normal because the vertical frequency is about 49 hz and it beats with the 50 hz of your tv, creating a 1 hz disturbance. The only way to get rid of it is to use a good quality green-screen monitor. I'm not sure about the ] characters, never seen that before. What happens if you turn on the test mode? I am near Campbelltown. How much RAM do you have? Are the dipswitches set properly?

Springwood is probably easier to get to, traffic-wise, than Epping is. What video output do you get?

TG16/PCE emulator >> Get it HERE.

You live over the other side of the city from me, I guess that's better than the other side of the country! Yes, my 80-column card is in colour.

Sure. Right HERE.

Arcade emulator for GP2X >> Get the emulator, and the new samples HERE.

Gameboy emulator >> Get it HERE.