Robert

Wolfmame MAME32qa SDLMAME MAMEinfo.dat MAME32FX History.dat 1.10 info.dat DDEmeMame 0.37b16.53(2006.11.06) AGEMAME 0.38 and AGEMAME32

http://mamedev.org/ >> Get command-line binary and source HERE.

And, you might be able to compare some waveforms to my computer.

Oh yeah, lol. It's 5:20am

Seeing as this is the SPORTS thread... Australia won the Cricket Champions Trophy, which was played in India, by defeating the West Indies by 8 wickets.

Welcome Dark Sith, hopefully you will reach level 50 soon!

more releases

Hopefully your monitor and cassette recorder will work, won't know until we try it I guess. But need to get yours to boot up first of course! Any progress?

What is what?

Yes they both deserve to die for their crimes against humanity.

The recommended cassette player was one of those flat portable ones from yesteryear. You could have batteries or run it off a power cord. Got your email, thanks! Do you have a working composite b/w monitor with a RCA socket as input? If so I could bring one of my super-80's over for you to look at.

the thing that's supposed to get rid of swear words.

There's another suggested mod that I made, it improves the cassette recording. I'll show it to you on my visit.

There are things in the filter one would never guess. Don't ask.

Aha! Unless you are planning on using the Printer Interface card (which contains a serial and a parallel port), I wouldn't worry about the S100 area. If the 0v pin (pin of U18 is not zero volts, then it's not grounded properly. There are some mistakes in the circuit diagram around U18 (on my copy at least). Make sure that on the left side of the chip it shows pins 2,7,10,12,15,5 and the right side should show 3 D0, 6 D2, 11 D3, 13 D4, 14 D5, 4 D1. edit: I've sent you an email, and I removed the address from your post, to spare you from the spammers.

We used to call them "dip headers" and they were available at any parts store. Well, back then they were. I'll send you an email shortly. What chip position (Uxx) is the missing 81LS95 used in?

Would Sunday the 19th be ok? I seem to recall that a 81LS97 could be used in place of the 81LS95. The lowercase kit consist of one eprom and what looks like a 74LS166.

PSX emulator >> Get it HERE.

BitTorrent client >> Get it HERE.

Amiga emulator >> Get it HERE.

GBA/NDS emulator >> Get it HERE (at bottom of page).

No, I meant coming to your place. I have a spare 2513. I have a bunch of spare chips somewhere, could be a 81LS95 there, who knows. It's a pity you don't have the lowercase kit, then you wouldn't need the 2513.

PSX emulator >> Get it HERE (bottom of page).

If you're using IC sockets they will very likely be causing problems. Check the voltages both at the pin and on the board to be sure. I have the EA article but it's exactly the same as the Assembly Manual. Perhaps we need to organise a visit sometime, I have a spare Assembly Manual.

The Assembly Manual comes with the kit, and therefore has no part number of its own. It has the kit's part number, K-3600. The other books I have are: * Monitor Handbook * B-3606 Dick Smith's First Book of Super 80 Programs * Software for the Super-80 Computer * The assembly manual for the Printer Interface Here's my complete list of Dick Smith part numbers: K3600 SUPER 80 COMPUTER KIT K3601 COMPUTER KEYBOARD K3602 TAPE BASIC K3603 OPTIONAL IC SOCKET PACK K3604 ROM BASIC K3606 S100 EXPANSION KIT K3607 SUPER 80 DELUXE CHARACTER GENERATOR K3610 PRINTER INTERFACE FOR THE SUPER 80 B3600 SUPER 80 TECHNICAL MANUAL B3602 SUPER 80 BASIC HANDBOOK B3606 FIRST BOOK OF SUPER 80 PROGRAMS H2515 MOULDED PLASTIC CASE FOR THE TRANSFORMER H3200 SUPER 80 CASE H8402 SUPER 80 CIRCUIT BOARD M2325 TRANSFORMER A2461 MOLEX CONNECTOR FOR TRANSFORMER SECONDARY P4160 16-PIN SOCKET FOR RAM X1186 16K EXPANSION RAM X3607 HORSE RACE GAME X3790 DEBUG-80 SUPER-80 DEBUGGER DISASSEMBLER X3791 EDIT-80 SUPER-80 EDITOR ASSEMBLER X3792 DUNGEON DILEMMA GAME