FBA-XXX Pro v1.28

[Prican25]

ok, currently posting (same groups as before) a v1.10 update which has all but jgokushi which seems to be unreleased as of yet and i also included a new samsho5 m1 that isn't the fake yet it doesn't match jb's sha1.

 

i'll also post the emu for those that can't grab from xbins

[wemery73]

thanks Prican25

[twen]

Is there a list of CPS1/2/NG games that have not been added yet? I'm just curious to know what other games there are.

 

(This would include known clones/bootlegs/hacks)

Edited March 7, 2006 by twen

[steve]

I believe that button 5 and 6 in the cps1/2 controls have been swapped in the latest build. Is this intentional or a bug? Can anyone confirm this?

[+ T +]

I believe that button 5 and 6 in the cps1/2 controls have been swapped in the latest build. Is this intentional or a bug? Can anyone confirm this?

It's intentional. This is the result of fixing a bug from previous builds where mappings to the Black and White buttons were reversed.

[steve]

Oh. I didn't know that black and white where swapped in previous builds. I have never had anything mapped to those button. All my 6 button Street Fighter type games have button 5 (forward kick) mapped to "A" and button 6 (roundhouse kick) to "B". In the lasted build button 5 is roundhouse kick and button 6 is forward kick. Look at the diagram below. The game button mapping was fine the bug must have been in the controller mapping.

 

 

 

previous builds

 

button 1 = jab

button 2 = strong

button 3 = fierce

button 4 = short

button 5 = forward

button 6 = roundhouse

 

v1.10

 

button 1 = jab

button 2 = strong

button 3 = fierce

button 4 = short

button 5 = roundhouse

button 6 = forward

[+ T +]

I'll look into it but it may not be for a while. In the meantime just re-map the controls to your liking.

[+ T +]

FBA-XXX Pro v1.11

=============

 

- Fixed inverted CPS buttons 5 and 6.

 

- Fixed inverted CPS PPP and KKK controls.

 

- Other fixes to controller config. (should be perfect now)

 

- Fixed sf2ce default dipswitch settings.

[wemery73]

+ T + are anyone else that might know..

 

on fba 1.11 i can't get my screenshots to show up..

 

i have them in my screenshot folder and there.png files..

 

im running it off my hard drive..

 

Anyone know what i did wrong?

 

worked on older builds running off dvd..

 

 

thanks for any and all help..

[tonbo]

After i got FBA-XXX Pro v1.11,I think some buttons in cps 1 & 2 are still invert (same as previous released)

[+ T +]

+ T + are anyone else that might know..

 

on fba 1.11 i can't get my screenshots to show up..

 

i have them in my screenshot folder and there.png files..

 

im running it off my hard drive..

 

Anyone know what i did wrong?

 

worked on older builds running off dvd..

You may need to move them to E:\TDATA\FFFF0504\screenshots since that's where they would have been saved when running from DVD. I'll look into fixing this.

 

After i got FBA-XXX Pro v1.11,I think some buttons in cps 1 & 2 are still invert (same as previous released)

No, everything is correct now. You probably need to delete your old savegame to remove any previously stored controller settings.

[wemery73]

thanks + T + ill try that

 

ok i ftped them over E:\TDATA\FFFF0504\ added screenshots folder and still nothing.....

 

any other ideals?

Edited March 8, 2006 by wemery73

[tonbo]

No, everything is correct now. You probably need to delete your old savegame to remove any previously stored controller settings.

<{POST_SNAPBACK}>

 

 

 

I did, by deleted TDATA/ffff0504 and UDATA/ffff0504, but it's same result.

Would you please checking about it again? I'm sure that i've delete the old save properly.

 

Here is my result when i remap the buttons.

 

 

default setting

 

fire 1 or LP : X

fire 2 or MP : A

fire 3 or HP : B

fire 4 or LK : Y

fire 5 or MK : Black

fire 6 or HK : White

PPP : Left Trigger

KKK : Right Trigger

 

 

My Result after remapping

 

fire 1 or LP : X

fire 2 or MP : Y

fire 3 or HP : Right Trigger

fire 4 or LK : A

fire 5 or MK : B -------------------------- become to HK (must be MK)

fire 6 or HK : Black--------------------- become to PPP (must be HK)

PPP : Left Trigger ------------------ become to KKK (must be PPP)

KKK : White -------------------------- become to MK (must be KKK)

 

Any advice?

[+ T +]

My Result after remapping

 

fire 1 or LP : X

fire 2 or MP : Y

fire 3 or HP : Right Trigger

fire 4 or LK : A

fire 5 or MK : B -------------------------- become to HK (must be MK)

fire 6 or HK : Black--------------------- become to PPP (must be HK)

PPP : Left Trigger ------------------ become to KKK (must be PPP)

KKK : White -------------------------- become to MK (must be KKK)

 

Any advice?

I just tried mapping the controllers to your config (both from the main menu and in-game) and it works perfectly for me. All the buttons are behaving exactly as they have been set.

 

Please double-check that you have deleted the folder E:\TDATA\FFFF0504 also delete the cfg and ini folders from the emulator directory if they exist.

 

ok i ftped them over E:\TDATA\FFFF0504\ added screenshots folder and still nothing.....

 

any other ideals?

Try putting them in the previews folder in the emulator directory. I've never made any changes to the FBA-XXX screenshot code so any problems that exist will have been there from the start.

[XtraTrstrL]

My Result after remapping

 

fire 1 or LP : X

fire 2 or MP : Y

fire 3 or HP : Right Trigger

fire 4 or LK : A

fire 5 or MK : B -------------------------- become to HK (must be MK)

fire 6 or HK : Black--------------------- become to PPP (must be HK)

PPP : Left Trigger ------------------ become to KKK (must be PPP)

KKK : White -------------------------- become to MK (must be KKK)

 

Any advice?

I just tried mapping the controllers to your config (both from the main menu and in-game) and it works perfectly for me. All the buttons are behaving exactly as they have been set.

 

Please double-check that you have deleted the folder E:\TDATA\FFFF0504 also delete the cfg and ini folders from the emulator directory if they exist.

 

ok i ftped them over E:\TDATA\FFFF0504\ added screenshots folder and still nothing.....

 

any other ideals?

Try putting them in the previews folder in the emulator directory. I've never made any changes to the FBA-XXX screenshot code so any problems that exist will have been there from the start.

<{POST_SNAPBACK}>

 

I deleted all those folders, and still, FIRE 5 and FIRE 6 are inverted for me. The PPP and KKK worked since I added the update though. That's what's weird about it, those worked immediately, but MK and HK are inverted now.