 Site Navigation
Latest blog entries
February 2010
| |
S | M | T | W | T | F | S |
|
»
| |
|
|
3
|
|
|
6
|
|
»
|
|
|
9
|
10
|
|
|
13
|
|
»
|
14
|
|
|
|
18
|
|
|
|
»
|
21
|
|
|
|
|
|
|
|
»
|
28
| | | | | | |
Latest Discussions
Shoma @ 02-9-10 04:39
Read: 18 Comments: 2
D.O.A @ 02-8-10 23:52
Read: 206 Comments: 9
Gomess @ 02-8-10 17:07
Read: 33 Comments: 6
Gomess @ 02-8-10 17:03
Read: 54 Comments: 14
Recommended Sites
|
|
| uBeeDisk 1.2.0 released |
| Posted by staticmem - 02-6-10 01:55 - 0 comments |
 |
uBeeDisk v1.2.0 New for this release: * Added --retry-l1 and --retry-l2 retry options. The existing --retry option is the same as option --retry-l2. * Added --unattended option to enable/disable automatic handling of errors. This mode is now enabled by default. See the global section of the ubeedisk.ini.sample if disabled is required by default. * Added --unattended-rab option to set number of sector errors allowed before aborting the copy process when the unattended mode is in use. * Added --unattended-rps option to set number of retries per sector allowed when the unattended mode is in use. * Added --unattended-seek option to set the maximum number of error seeks per disk read allowed when the unattended mode is in use. * Added another option to the recovery options: '[T] ReTry (don't seek T0)' * Added Atari ST 80T Single/Double sided and some MSDOS formats to ubeedisk.ini.sample. * Added --diskdesc option so that a disk description can be passed. * Added --diskdescf option for a disk description contained in a file. * Added --force option to bypass confirming requested actions. * Added --append-error to append the error log (if created) to the 'info' file instead of creating an error file. * Added a win32 binary installer to the distribution. Changes: * Changed method used for reading sectors as was causing many soft retries to show up in the '.info' file and likely to have caused problems on some disks because of a too low retry value at the LibDsk level. * Disabled error checking for disk writing as this was failing when writing to disk images following certain disk read errors. This will be looked at further at another time. * Changes and additions to the generated '.info' files. * Changed error logging to now go to a '.err' file by default unless --append-error has been specified. Get it here: http://sourceforge.net/projects/ubeedisk
|
Read 106 times - make a comment
|
| Ami/WinArcadia 13.02 released |
| Posted by Minuous - 01-31-10 10:53 - 2 comments |
 |
WinArcadia 13.02 (Windows): 7 February 2010
AmiArcadia 13.02 (AmigaOS 3): 7 February 2010
AmiArcadia 8.3 (AmigaOS 4): 29 October 2008
AmiArcadia 4.81 (MorphOS): 6 December 2007
Super Bug Advance 1.3 (GBA): 11 September 2009AmiArcadia and WinArcadia are multi-emulators of these Signetics-based machines: * Emerson Arcadia 2001 console family (Bandai, Emerson, Grandstand, Intervision, Leisure-Vision, Leonardo, MPT-03, Ormatu, Palladium, Poppy, Robdajet, Tele-Fever, Tempest, Tryom, Tunix, etc.) (1982); * Interton VC 4000 console family (Acetronic, Fountain, Interton, Prinztronic, Radofin, Rowtron, Voltmace, Waddington, etc.) (c. 1978); * Elektor TV Games Computer (1979); * PIPBUG-based machines (Electronics Australia 77up2 and 78up5, Signetics Adaptable Board Computer, Eurocard 2650, etc.) (c. 1977-1978); * Signetics Instructor 50 trainer (1978); * Central Data 2650 computer (1977); * Astro Wars and Galaxia coin-ops by Zaccaria (1979-1980); * Malzak 1 and 2 coin-ops by Kitronix (c. 1980); and * Chaos 2 computer (1983) (preliminary). Features include: ReAction GUI, load/save snapshots, windowed and full- screen modes, CPU tracing, trainer, drag and drop support, graphics scaling, automatic load/save of configuration/game, keyboard/joystick/ gamepad/paddle/mouse/trackball support, autofire, turbo mode, gameplay recording/playback, PAL/NTSC modes, sprite demultiplexing, help windows, source code, debugger, frame skipping, redefinable keys, save screenshots (4 supported formats), ARexx port, network play, real-time monitor, locale support, game selection sidebar, text-to-speech, printer output, undithering, support for ZIPped games, clipboard support, palette editor, tone retuning, high score management, force feedback. Changes since V13.01: . Miscellaneous improvements and bug fixes. http://amigan.1emu.net/releases/http://amigan.yatho.com/
|
|
Read 175 times - last comment by Minuous
|
| RockNES v5.03 Released |
| Posted by VT-Vincent - 01-30-10 05:50 - 0 comments |
 |
RockNES, an NES emulator for Windows has been updated today. This new release is available in two versions - the i586 release which is optimized for single-core processor and the Core2Duo release which is optimized for dual-core processors. Below is a list of changes in this release: QUOTE - Reworked iNES mapper I/O handler.
- Reworked PPU color code and event scheduler.
- Fixed sprite 0 strikes.
- Fixed triangle channel output.
- Fixed triple buffering setup.
- Fixed graphics reset and triple buffering set.
- Fixed PPU timing and DMC IRQ clocking.
- Improved Allegro sound support.
- Changed APU sound queue/dequeue method.
- Removed timeslice from double buffering, increases CPU usage though.
- Mappers added: 46, 58.
- Mappers fixed: 0,1,16,34,43,64,68,69,72,79,83,88,90,92,97,113,184,187.
- Removed NESticle savestate support for good.
- Optimizations and some speed up.
- Other minor things fixed. Source: http://www.vtemulation.net/forums/index.php?showtopic=476Author's Homepage: http://rocknes.kinox.org
|
|
Read 117 times - make a comment
|
| nGlide 0.92 with Glide3 support released. |
| Posted by nGlide - Zeus - 01-30-10 01:34 - 0 comments |
|
Added support for Glide3 library (glide3x.dll). In particular: -added support for Diablo 2 -added support for Diablo 2: Lord of Destruction -added support for Fifa 99 -added support for Heli Heroes -added support for Le Mans 24 Hours -added support for Need For Speed 3: Hot Pursuit -added support for Need For Speed 4: High Stakes -added support for Need For Speed 5: Porsche Unleashed -added support for Project64, N64 Emulator (with Glide64 plugin) -added support for realMYST: Interactive 3D Edition -added support for Rollcage -added support for Rollcage Stage 2 -added support for Sinistar: Unleashed -added support for Test Drive 5 -added support for Turok 2: Seeds of Evil -added support for World War 3: Black Gold Download link: Glide wrapper 0.92
|
|
Read 162 times - make a comment
|
| Ootake v2.29 Released |
| Posted by VT-Vincent - 01-27-10 15:19 - 0 comments |
|
Ootake, a Japanese Turbo Grafx 16 emulator for Windows has been updated today. Below is a list of changes in this release: - The processing of "Monochrome Screen Function" mounted with v2.28 was sped up (lightened). I think that the bug that was slow operation in some personal computer environments was solved.
- The processing when the volume was adjusted ([PageUp],[PageDown]key) was sped up. And, the interval of the adjustment was detailed (Change from 5 to 4). (It can be fine-tuned with [Ctrl]key.)
- When CD-DA is played, if the seek(access) to the same part is consecutive, it is processed at high speed. Moreover, the timing was brought close to a real machine. In "Draemon - Nobita no Dorabian Night (CD)", the problem that had been freezed after "Jaian" had been helped was solved. * "Draemon - Nobita no Dorabian Night (CD)"'s timing of the CD access is severe. Please play with CD full installation ("CD-ROM->CD FullInstall" menu).
- The stop timing of ADPCM voice was corrected.
- The access timing to the CD-DA track when the check on "Speed->Fast CD" menu is removed has been adjusted.
- Additionally, a detailed part has been improved and corrected.
Source: http://www.vtemulation.net/forums/index.php?showtopic=473Author's Homepage: http://www.ouma.jp/ootake/
|
|
Read 171 times - make a comment
|
| MESS 0.136 released |
| Posted by Robert - 01-10-10 19:57 - 0 comments |
 |
Multi-system emulator >> Get it HERE. QUOTE New System Drivers Supported:
-----------------------------
- Consul 2717 with PMD-32 [Miodrag Milanovic]
- Elektor SC/MP [Miodrag Milanovic]
- Epoch Super Cassette Vision [Wilbert Pol]
- Hawthorne Technologies TinyGiant HT68k [Miodrag Milanovic]
- Hector MX40c [JJ Stacino]
- Hector MX80c [JJ Stacino]
- Microsystems International Limited MOD-8 [Miodrag Milanovic]
- MITS Altair 8800bt [Miodrag Milanovic]
- Robotron K1003 [Miodrag Milanovic]
- Science of Cambridge MK-14 [Miodrag Milanovic]
Systems Promoted from GAME_NOT_WORKING:
---------------------------------------
- Ausbaufähiger Mikrocomputer mit dem U 880 (Huebler/Everts) [Curt Coder]
- Hector 2HR+ [JJ Stacino]
- Hector 2HR [JJ Stacino]
- Hector HRX [JJ Stacino]
- Kaypro 4 [Robbbert]
- Kaypro 10 [Robbbert]
- Omni II [Robbbert]
- Victor [JJ Stacino]
- XOR S-100-12 [Curt Coder]
Skeleton drivers:
-----------------
- Callan Unistar Terminal
- CCS Model 2422B
- CCS Model 2810
- Commodore LCD [Curt Coder]
- Dual Systems 68000
- ETI-660 [Curt Coder]
- Exelvision Exeltel
- Funtech Super A'can [Wilbert Pol]
- Hewlett-Packard HP16500b [R. Belmont]
- Indiana University 68030 board
- Intel SDK-85
- Intel RPC 86
- Intel iPB
- Intel iPC
- Intel iPDS
- Intel iSBC 86/12A
- Intel iSBC 286
- Intel iSBC 286-10
- MCS Basic 52
- MCS Basic 31
- Micronic 1000 [Curt Coder]
- MITS Altair 680b
- Morrow Designs Micro Decision MD-2 and MD-3
- Morrow Tricep
- NorthStar Horizon
- Onmibyte MSBC-1
- Plan-80
- Protec Pro-80
- PIMPS
- QT Computer Systems SBC +2/4
- Sage II
- SAPI-1 ZPS 2
- SAPI-1 ZPS 3
- SBC6510
- Sharp PC-E220
- Sun-1
- SWTPC 6800
- Vector Graphic Vector 1+
- Vector Graphics - Vector 4
System Driver Changes:
----------------------
- [APEXC] Fixed image loading [Robbbert]
- [BETA] Fixed display flickering. [Curt Coder]
- [C64] Emulated the Commodore 1541 disk drive at hardware level. G64 images are now supported (D64 support coming) [Curt Coder]
- [EXL100] Added 7041 rom dump. [Wilbert Pol]
- [EXIDY] Improved sound compatibility. [Robbbert]
- [FMTOWNS] Various updates: [Barry Rodewald]
* Added FDC IRQ and disk density select
* Fixed ANK CG ROM enable
* Re-worked VRAM access, allowing startup logos to display on the Marty and Car Marty
* Added basic keyboard support
* Added standard 2 button joystick support
* Corrected text mode colours
* Implemented CD-ROM controller, and CD-DA support
* Hooked up YM3438 interrupts
* Re-worked video code to support a basic CRTC implementation
* Fixed VBlank IRQ
* Added sprite implementation
* Mapped RF5C68 wave RAM
- [GBA] Remapped Select button to MESS default. [Justin Kerk]
- [GLASGOW] Upgraded artwork to be clickable. Fixed various driver problems. Chess can be played by using the mouse. [Robbbert]
- [HUEBLER] Added keyboard. [Curt Coder]
- [INTV] Fixed intvkbd. Fixed disassembler. [Robbbert]
- [MPF1] Converted to use driver state, added speech and printer ROMs, implemented MONI/INTR keys, monitor BREAK logic, added artwork for mpf1b, added layout for mpf1p. [Curt Coder]
- [ORIC] Telstrat regression has been fixed. [Robbbert]
- [SMS] Added SegaScope (3D-Glasses) support to Sega Master System I drivers (i.e. sms1, sms1pal, smsj & sg1000m3). To enable this, enter Driver Configuration menu and turn on SegaScope, then go in the Video Options menu and choose one of the SegaScope views. [Fabio Priuli]
- [SMS] Added Terebi Oekaki graphic board support to Japanese drivers (i.e. smsj & sg1000m3). To enable this, start emulation of "Terebi Oekaki", then enter Driver Configuration menu and turn on the Tablet. Once enabled, remappable controls will also appear in the Input (this System) menu. [Fabio Priuli]
- [SMS] Added Reset button to SMS1 and improved Lightgun behavior based on "Color & Switch Test". [Enik Land]
- [TI81] Added v1.6K BIOS dump. [critor]
- [TI85/TI86] Converted the serial interface to a device. [Wilbert Pol]
- [TI99] Fixed a crash when the user mounts cartridge dump files in legacy mode. [Michael Zapf]
- [XOR100] Added terminal support. [Curt Coder]
Source Changes:
----------------
- The core is based on MAME 0.136. This incorporates all features of the update to this core. [MAME team]
- Cleanups (static qualifiers, headers, renames, reduced global symbols, dead code cleanups, brace cleanups, and more multisession friendly init code). [Atari Ace]
- WD17xx write track supported in proper way instead of using more sector writes [Michael Zapf]
- Added F4 character-set viewer to many computers [Robbbert]
- The -listdevices option has been temporarily renamed to -listmedia, until it is merged with MAME's -listdevices command [Robbbert]
- Fixed bug 1770. Listmedia will indicate if a driver has no devices, or if the driver doesn't exist. [Robbbert]
|
|
Read 458 times - make a comment
|
| FBL 1.3 released |
| Posted by Robert - 01-10-10 10:18 - 0 comments |
|
nes6502 has made a few fixes and made a new release of Final Burn Legends, which is an arcade emulator for the Xbox. Read the release notes and other details HERE.
|
|
Read 404 times - make a comment
|
| FBL 1.2 released |
| Posted by Robert - 01-7-10 20:45 - 0 comments |
|
nes6502 has released Final Burn Legends 1.2 for the Xbox. Read the details at the discussion thread HERE.
|
|
Read 462 times - make a comment
|
|
