Yes, King of Fighters XI IS playable on PCSX2!

[garyoak99]

Mine is also 2.36. My main question is, what format did you make the .iso to play it? Seems almost obvious that's the main problem.

 

It's a standard ISO image file. It looks like the problem may be the PCSX2 configuration. Could you give me your PCSX2 configuration here like I did on page 2 of this topic?

[blob2]

Mine is also 2.36. My main question is, what format did you make the .iso to play it? Seems almost obvious that's the main problem.

 

It's a standard ISO image file. It looks like the problem may be the PCSX2 configuration. Could you give me your PCSX2 configuration here like I did on page 2 of this topic?

 

Here's my config setup:

 

Graphics:

**I tried all of these and none of them work, I get various error messages**

 

First Controller:

SSSPSX PAD Plugin 1.6.0

 

Cdvdrom:

**I tried all of these and none of them work, I get various error messages**

 

Usb:

USBnull Driver 0.4.0

 

Sound:

P.E.Op.S. SPU2 D Sound Driver 1.4.0

 

Second Controller:

SSSPSX PAD Plugin 1.6.0

 

Dev9:

DEV9null Driver 0.3.0

 

FireWire:

FWnull Driver 0.4.0

 

Bios:

Europe v02.00(14/06/2004) Console

 

I even tried your exact setup, but it doesn't work. I get that same error message "Error loading C:\Emulators\PCSX2\kof11-gant.iso" and then I get the error "Error opening CDVD Plugin" afterward.

Edited August 31, 2006 by blob2

[garyoak99]

Graphics:

**I tried all of these and none of them work, I get various error messages**

 

Cdvdrom:

**I tried all of these and none of them work, I get various error messages**

 

 

Bios:

Europe v02.00(14/06/2004) Console

 

I even tried your exact setup, but it doesn't work. I get that same error message "Error loading C:\Emulators\PCSX2\kof11-gant.iso" and then I get the error "Error opening CDVD Plugin" afterward.

 

That is very interesting; it looks like it may have something to do with the configuration of the graphics or the CDVDROM.

 

How are you starting PCSX2; are you choosing the standard one or the TLB (non VM)?

 

Are you choosing File--->Run CD?

[blob2]

 

Graphics:

**I tried all of these and none of them work, I get various error messages**

 

Cdvdrom:

**I tried all of these and none of them work, I get various error messages**

 

 

Bios:

Europe v02.00(14/06/2004) Console

 

I even tried your exact setup, but it doesn't work. I get that same error message "Error loading C:\Emulators\PCSX2\kof11-gant.iso" and then I get the error "Error opening CDVD Plugin" afterward.

 

That is very interesting; it looks like it may have something to do with the configuration of the graphics or the CDVDROM.

 

How are you starting PCSX2; are you choosing the standard one or the TLB (non VM)?

 

Are you choosing File--->Run CD?

 

I am starting PCSX2 by selecting the one that does not ask you to enter your name for physical memory purposes, because that isn't working. I pick the one that says PCSX2t, not the regular PCSX2.

 

I choose both File>>Run CD and Run>>Execute, neither works. After messing with the configs, and doing a "test" for each config setting, it looks like it comes down to a graphics problem. In the graphics mode, I have selected ZeroGS KOSMOS 0.95.2, and it says it is working properly, but I get the error message "Error opening GS Plugin." The other one (GSdx9) says it is NOT working properly, and when I try to run the game with it I get the error "Supported pixel shader is too low! Supported: 0.0, Selected: 2.0." So that's where I'm at right now.

[Agozer]

You might have posted an answer to this earlier, but what graphics card are you using? You need a card that supports Pixel Shader 2.0 specs.

[Samurai Edge]

Cool! And getting it run sounds hard. Hopefully I can get it running after I get those neccessary things.

[blob2]

Do most modern graphics cards support shading 2.0? Or do I need a specialized one?

[Agozer]

Pixel Shader support is determined with DirectX implementation the card uses. Cards that use 9.0 use PS2.0 (ATI Radeon 9500+, X1xxx+ lines support PS3.0 [DirectX9.0c] --- NVIDIA GeForce 5xxx+, 6xxx+ line supports PS3.0 [DirectX 9.0c])

[blob2]

So just to make sure--I will NOT be able to use PCSX2 without a new graphics card, correct?

[Agozer]

So just to make sure--I will NOT be able to use PCSX2 without a new graphics card, correct?

That seems to be the gist of it.

[garyoak99]

Do most modern graphics cards support shading 2.0? Or do I need a specialized one?

 

My graphics card came with my computer so most modern graphics cards support shading 2.0!

 

My graphics card is Radeon X300 with only 64 MB of RAM and it runs PCSX2 and KoF XI just fine on it!

[blob2]

Do most modern graphics cards support shading 2.0? Or do I need a specialized one?

 

My graphics card came with my computer so most modern graphics cards support shading 2.0!

 

My graphics card is Radeon X300 with only 64 MB of RAM and it runs PCSX2 and KoF XI just fine on it!

 

Well it looks like I'm SOL. I have a laptop and can't replace the graphics card, something I didn't realize until someone at a store told me so. So I guess I can't play KOFXI on my pc at all

[Agozer]

Do most modern graphics cards support shading 2.0? Or do I need a specialized one?

 

My graphics card came with my computer so most modern graphics cards support shading 2.0!

 

My graphics card is Radeon X300 with only 64 MB of RAM and it runs PCSX2 and KoF XI just fine on it!

 

Well it looks like I'm SOL. I have a laptop and can't replace the graphics card, something I didn't realize until someone at a store told me so. So I guess I can't play KOFXI on my pc at all

No, you can't. laptops aren't really made for emulation (or any integrated graphics chip for that matter). Unfortunate but true, and holds true every single time when an emulation-realated question involving said chips pops up.

[pwr]

I am having a similar problem. I have the 2.36GB Gant image mounted in Daemon 4.03HE, mounts fine and everything. In PCSX2 I have configured Cdvdrom plugin P.E.Op.S CDVD Driver 1.2.0 to use the drive Daemon provides, no problem there. Video is also configured, same with sound etc.

 

No matter what I try (change) I always get the error:

 

pcsx2t.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

 

AppName: pcsx2t.exe AppVer: 0.0.0.0 ModName: unknown

ModVer: 0.0.0.0 Offset: 00000000

 

My rig:

 

Abit AN8-V (BIOS rev. 2.0)

Athlon 64 3000+

2 x 512 MB Kingston Valueram DDR400 (3-3-3)

WD800JB, WD1600JB

Gainward Ultra/2300PCX Nvidia 6800 GS

Antec SP-400P

XP Pro SP2 up tp date

[Agozer]

It is very difficult to find the cause of the problem from such a general error message (unless you can debug and trace memory maps and work out the problem from there).