- All Platforms
- Add support for emulation of 256 MB of RAM - the maximum possible in the Risc PC and A7000 architecture.
- A two-button mouse mode, for use on laptops and similar: this menu option swaps the right and middle mouse buttons, allowing the more common RISC OS use of Select and Menu on two-button mouse systems such as laptops.
- Several fixes to the "Follow host mouse" feature, which should make it more reliable: Correctly interprets OS_Byte 106 and handles pointer/cursor linking.
- SWIs are now intercepted even when called using CallASWI, based on a patch by Alan Buckley. This further improves the reliability of the "Follow host mouse" feature.
- Resolved ARM bug where rotate could set C flag incorrectly.
- A possible crash in the Dynamic Recompiler has been prevented by a fix from Tom Walker.
- RISC OS 4.02 with no VRAM configured now boots in Risc PC emulation.
- Workaround ADC issue on 64bit recompiler which prevented RISC OS 5.17 from booting.
- Refactoring of code, particularly relating to RAM and IOMD.
[*]Windows
- The window size is now taller by one pixel. Previously it was too short, and the very bottom row of the display was missing.
- A potential freeze when choosing "File->Exit" has been fixed.
- An improved icon, which includes high-resolution variants for Windows Vista and later.
[*]Linux
- Some improvements to the GUI, including improving the layout of the "Configure" window.*
- Add support for emulation of 256 MB of RAM - the maximum possible in the Risc PC and A7000 architecture.
- 0 replies
- 1,149 views
- Add Reply
- More accurate microwire clock emulation
- SCSI class 1 (ICD) command support for drives > 1 GB
- Improve shifter (add another method to do 4 pixel hardware scrolling, better emulation for 0 byte blank line)
- Better filters and model for sound emulation
- Correct VBL timings in TT monochrome (double clicking works now)
- More cycle accurate Falcon DSP CPU emulation. All the demos that needed 32Mhz CPU with the old CPU core in Hatari v1.5, work now at correct 16Mhz with the WinUAE CPU core
- 030 MMU emulation with the WinUAE CPU core
- Debugger improvements : "history" command to list instructions executed before entering debugger
- Fixed behavior of the Caps Lock key
- 0 replies
- 1,353 views
- Add Reply
- Small performance optimization by using 32-bit integer arrays over byte arrays for framebuffer data.
- Fixed: Broken Key Binding functionality in certain scenarios.
- DirectX: Eliminated synchronization with vertical retrace to make UX acceptable on a wider range of systems.
- DirectX: Now runs when there is no system audio device available.
- Introduced lightweight WebInstaller (ClickOnce) option to prepare for future deprecation of the .msi installer.
- Upgraded Silverlight version to Silverlight 5.
- Initial Windows Phone release to Windows Phone Marketplace.
- More games added to the Silverlight distribution.
- Added: ROM entry for Pac-Man Collection (an Atari 7800 Homebrew.)
- 0 replies
- 1,220 views
- Add Reply
- Added driver for Lemmings [iq_132]
- Added support for trackball in Lemmings [barry]
- Added driver for Pac-Land [iq_132]
- Added driver for games on Psikyo4 hardware [iq_132]
- Added driver for games on Rabbit Punch hardware [iq_132]
- Added a preliminary driver for SNES hardware, enabled in debug builds only [kev]
- Changed CPS-3 driver to use MAME flash dumps, and added verification for CPS-3 driver back to ROM_VERIFY dat [barry, suggested by Haze]
- Added preliminary Puzzli2 protection simulation and removed the patches from the PGM driver [iq_132]
- Delayed the VBlank IRQ in the CPS-2 driver to part through the VBlank period, fixes disappearing text in the Dungeons & Dragons games [barry]
- Added sound to fantzonep in the Sega System 16A driver [barry]
- Improved IRQ timing in Sega System Y driver [barry]
- Reduced the volume of some CPS-2 games that were too loud [barry]
- Fixed sound in Konami drivers which weren't generating enough IRQs per frame to drive the sound [barry]
- Fixed a bug in the K052360 sound core, fixes Parodius booting [barry]
- Fixed inputs in Dream Land in the Bubble Bobble driver [barry]
- Fixed Rambo III in the Taito B driver [barry]
- Fixed default dips in Yes/No Sinri Tokimeki Chart in the Taito F2 driver [barry]
- Tidied the CPS-1, CPS-2, Galaxian, Irem, Konami, Neo Geo, Sega and Taito drivers [barry]
- Changed the Zet interface to initialise a single CPU at a time, updated all affected drivers [iq_132]
- Made sure the BurnYM2151 handlers are NULLed on exit [barry]
- Incorporated endian fixes from FBANext for various CPU cores and interfaces, as well as the CPS-3, Neo Geo, Psikyo, Sega, Taito and Toaplan drivers [barry, FBANext by Lantus]
- Added support for various MAME graphics decoding macros [iq_132]
- Added some Unicode titles to the PGM driver [JacKc]
- Fixed various localisation issues [barry, reported by Benjamin Siskoo]
- Changed default of the "Don't change Num Lock status" option to on [barry]
- Added SDL audio, input and video plugins so I can re-port to SDL [kev]
- Moved the burner/win32 folder to burner/platform/win32 [kev]
- Changed interface directory layout [kev]
- Changed the path handling to be more portable (changed // to \) [kev]
- Updated unzip.c to the latest version [kev]
- Improved the gamelist filter functionality and added support for Capcom (Other), Data East, Seta, SNES and Technos filters, updating relevant drivers [barry]
- Moved any Irem, Kaneko, Sega, Taito or Toaplan drivers in the misc filters to the relevant filter [barry]
- Moved Konami drivers from misc to the Konami filter [iq_132]
- Added defines for _XBOX headers and plugins in the burner and interface folders [barry]
- Reduced the optimisation levels for GCC 3.4.5 to match other GCC builds, fixed some warnings that are now generated by GCC 3.4.5 [barry]
- Matched all sets to MAME 0.144u4 [barry]
- 0 replies
- 1,438 views
- Add Reply
RPCEMU 0.8.9 released

By Robert,
RPCEmu emulates the Acorn Risc PC and A7000
Get it here --> http://www.marutan.net/rpcemuspoon/
Version 0.8.9 - 1/1/2012
Changes in this build
Hatari 1.6.0 released

By Robert,
This emulates the Atari ST computer.
Get it here --> http://download.tuxf...g/hatari/1.6.0/
2012-01-01: Version 1.6.0
Hatari 1.6.0 "Happy New Year 2012" has been released.
Emu7800 1.0 released

By Robert,
This emulates the Atari 7800 console.
Get it here --> http://emu7800.sourceforge.net/
v1.0
FB Alpha 0.2.97.18 Released

By Robert,
Arcade emulator.
Get it here --> http://www.barryharris.me.uk/fba.php
To celebrate New Year, here is a new FB Alpha release.