New Fba-xxx With Source

[Mr.X]

well gogo says theres gonna be another release and when that one is out so shall the source

It's updated to 06.01.04 (don't know if samsho5 SRAM error's fixed...).

About samsho5, it wasn't an error. Having cheats & Unibios enabled at the same time 'll cause the WORK RAM errors to appear (as the emulator 'll apply the cheats while the game 's testing the RAM).

Edited June 3, 2004 by Mr.X

[zoogderrick2]

i need help

 

i just downloaded the june 1st version of fbax and all my new roms, mslug4, mslug5, samsho5, svc, rotd, pim give me crc errors, and says that the p1 rom is too big, please help me, i tried using romcenter but its no help.

[Mr.X]

i need help

 

i just downloaded the june 1st version of fbax and all my new roms, mslug4, mslug5, samsho5, svc, rotd, pim give me crc errors, and says that the p1 rom is too big, please help me, i tried using romcenter but its no help.

Just open the default.xbe with an Hex editor to see the roms & romsets names. Also, use No CRC option after launching FBA-XXX, if your roms don't match the required roms.

[zoogderrick2]

thanks got most of the roms working but i have a question for samurai showdown 5, i have one 8mb p1 rom, but in winhex it says 1 4mb p1 and 1 4mb p2, do i split it, or something i tried using winhex but i think it ruins my roms

[Mr.X]

thanks got most of the roms working but i have a question for samurai showdown 5, i have one 8mb p1 rom, but in winhex it says 1 4mb p1 and 1 4mb p2, do i split it, or something i tried using winhex but i think it ruins my roms

Yes, U're right. U can split them in 2 x 4 Mb with your hex editor or with softs like X-Cut, Hacha or Winsplit.

 

If U want the updated decrypted P roms with the right CRC to match the ones required by the emu, go to Romshare forum in General emulation/Samsho5 Topic to find the patches : http://bbs.romshare.net (have to be registered, it's free).

[zoogderrick2]

thanks one more thing, on metal slug 4, how do i get the m1d and m1 roms, i mean they are 64 k i think and mine are 128 k, the game runs fine but the sound crackles.

[Mr.X]

thanks one more thing, on metal slug 4, how do i get the m1d and m1 roms, i mean they are 64 k i think and mine are 128 k, the game runs fine but the sound crackles.

It's due to the fact M1d 128 Kb is an overdump. Split it in 2 x 64 Kb to get the M1d needed by the emu.

[Prican25]

sound crackles can also deal with the v roms if they aren't split unless iq_132's neopcm fix was added (which isn't)

 

another note, i finally got the source so now i'll begin working on my new compile and will make a dat

Edited June 4, 2004 by Prican25

[Mr.X]

sound crackles can also deal with the v roms if they aren't split unless iq_132's neopcm fix was added (which isn't)

 

another note, i finally got the source so now i'll begin working on my new compile and will make a dat

Yes, we know the 2 V roms of 8 Mb (each) generate glitches if neopcm fix isn't added in mslug4 driver.

 

So, we can use the 4 decrypted V roms if neopcm fix isn't added & if we don't want to compil our own FBa-X.

[Prican25]

the mslug4nd set in the current version uses 4 vroms but this set is actually considered as a bootleg. i won't change it in my compile but might later on also i just noticed that samsho5 based from kawaks dev drivers are in there, did anyone try this out yet?

[Mr.X]

the mslug4nd set in the current version uses 4 vroms but this set is actually considered as a bootleg. i won't change it in my compile but might later on also i just noticed that samsho5 based from kawaks dev drivers are in there, did anyone try this out yet?

Yes, about mslug4, the whole set is bootleg ; the 8 Mb V roms 're patched (4 bytes diff. per V).

 

I already made a compile with samsho5 with P roms matching Kawaks 1.48 Dev driver, I got an error after launching the game.

[Prican25]

ok, trying to compile the src but i get a tool error and if i try to use an old FBA.vcproj (like i did with the last src) it gives me a few errors, anyone got any ideas?

[villain1]

Will there be a new prican build of FBAXXX or is there a prob with the source ?

[Prican25]

right now i'm having a prob with the source where it gives me a tool error so if i can some how get passed then there will be a new release by me

[HK$]

It compiles fine for me. You have to edit the.vcproj and specify where nasm is.