Jump to content

HELP...Whenever I plug in a crossover cable I get a DNS error


03bgood

Recommended Posts

Is your internet still plugged in? To do Xbox > PC when you have an internet connection that is connected via Ethernet, you'll need 2 network cards. This is something that should be rather obvious.

 

If you have the above noted and are hooked up properly. What is your network setup? Have you gotten any errors in Windows about conflicting IP addresses or any error for that matter?

Link to comment
Share on other sites

Yes, I've gotten IP conflicts errors but now my internet connection shows up but I still can't establish a connection in FlashFXP or pull up my Xbox HDD in Internet Explorer, what am I doing wrong?

Edited by 03bgood
Link to comment
Share on other sites

Here's what I have:

 

Xbox:

 

Setup Network: Yes

Use Static IP: Yes

IP: 192.168.1.103

Subnetmask: 255.255.255.0

DefaultGeteway: 0.0.0.0

DNS: 12.182.103.3

DNS: 12.182.193.4

Setup Delay:

Skip Setup if No Link: Yes

 

PC:

 

IP adress: 192.168.1.103

Subnet mask: 255.255.255.0

Default gateway:

 

Preferred DNS server: 12.182.103.3

Alternate DNS server: 12.182.193.4

 

I really don't get it, why it won't work, first my internet connection wasn't working w/ the cable plugged in, now it is. But I still can't pull up my Xbox's hard drive contents!

Link to comment
Share on other sites

I can see that both the pc and xbox have the same address which is a no-no. (192.168.1.103)

Change the xbox to be 192.168.1.104

 

I still don't see how you could connect the internet and the xbox to your pc at the same time. How are you doing that?

Link to comment
Share on other sites

You'll have to refer to the documentation that came with the dashboard you are using. I know in UnleashX I've had to manually edit in a menu item called "Emulators" and the directory it points to.

 

When in doubt, RTFM!

Link to comment
Share on other sites

GREAT, now I'm getting an FTP Server error, here's what it says:

 

FTP Server Error

 

An error occured copying the file to the FTP Server. Make sure you have permission to put files on the server.

 

Details:

200 Type set to IMAGE

502 pasv is not implented

200 Type set to IMAGE

200 Port command ok.

426 Connection closed, file opening failed.

 

WHAT THE HELL DOES THIS MEAN???

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...