DevHook for 2.71

[Mooney]

Well, a breakthrough has just been made for your mobo, the TA-802, as long as you have fw 2.50, and a trust in fellow humans

0okm is ready! For all you TA-082 owners who are running FW 2.50 still, you now have the option of becoming a 1.50 user! That’s of course if you agree to 0okm’s terms & conditions:

 

if your PSP is FW2.50 TA-082 and you

1. Trust me & support me

2. Agree NOT share my program & softdowned FW dump data to anyone

3. you know “Flash write” program may brick the PSP and Use it at your own Risk

4. you have a “ISP email Acc”

 

FAQ

Q: Why need Trust me ?

A: because you need to give me your “ISP email”, “PSP Serial Number” and “FW dump DATA”.

 

Q: Why can’t shared my program to other

A: because each program just for one PSP, other PSP use it will brick !!

 

Q: What happen if you shared my program or softdowned FW dump data to anyone ?

A: i will RELEASE ALL your personal information and STOP help people SoftDown !!!

 

if you Accept all above conditions

you can send a email to 0okm00@gmail.com

with Subject “I Accept all SoftDown conditions”

by your “ISP email Acc”

and i will reply a email to you

and tell you how to send me the “PSP Serial Number” and “FW dump DATA”

 

Moving forward — you may perform a FW data dump using the EBOOT below. It functions with the latest version of eLoader, thus GTA:LCS is not needed. This software will check your PSP to determine whether or not it’s a genuine FW 2.50 TA-082; if not, the display will read “Sorry, This Software CAN’T Support Your PSP.” Otherwise, the required data to perform the SoftDown will be dumped to ms0:\O250082Dump.

 

Download:

Original FW2.50 TA-082 Check & Dump v1.20

eLoader v0.9.8 (v0.9.9 crashes)

 

- source: 0okm’s blog

[floopy]

Yeah, read that already. I already updated to 2.71 though. Still, i'm sure there will be a downgrader for 2.71 pretty soon. Even if there isn't, I don't mind. I can already do anything someone with a 1.5 fw can.

[BlackKnight]

No worries Mooney. Its good to know there are people on here that still care about the PSP when these things happen.

 

Btw, you said PSP SMS doesnt work- try MMSPlus. Its a Master System Emulator that works fine with the eLoader.

 

 

In other news, I dont trust 0okm. He's demanding an awful lot for a downgrader. If he really needed the PSPs serial number he could ahve just released one where you have to enter it yourself.

 

Even if I had a TA-082 I wouldnt trust him with that much.

Edited October 3, 2006 by DragonKeeper

[Mooney]

Yeah, I got MMSPlus, and now it is one of my favorite emulators! Now I must go get more games for it...

 

And yeah, I totally agree. I would not trust some random dude with my PSP, no matter HOW much stuff he's done in the past.

 

I doubt you are too familiar with the story of Darkfader, since he was mainly DS dev. He started out great, finding ways to hack the DS and its games, and he made quite a few contributions to the dev community. Then, he released two trojan brickers for the DS. One was dubbed RunMe which bricked the DS and showed a picture of a brick wall, and the other was released as a hentai viewer, which did the same thing. He said that this was only supposed to affect nasty pervs looking for hentai on their DS, but it was WAAAY to hard to control the distribution of something like that, and should never have gotten out in the first place.

[BlackKnight]

Coder 0okm, who was working on a SoftDown downgrader for TA-082s, has decided to stop working on the said project. This decision came about after somebody tried to hack into his Gmail account and discredited him with some nasty gossip.

 

Well, well, well what a pansy. Dark_AleX, who is behind the Homebrew Enabler got totally dissed on PS2nfo and impersonated by a bunch of guys, and that didn't dissuade him. Seems like there were more than a few that didn't trust our friend 0okm, so guess he decided to bail now before he got in any deep sh!t.

[pockchow]

Well its for 2.71 PSPs if you have one- lets you emulate 1.5 on it.

 

First download the Homebrew Enabler [Revision B] (hen_b.rar) from that link and copy it to your PSP. Then goto the Photo Menu and run HEN like you would with any of the recent TIFF exploits. If it works, the screen will turn blue, then green, then the PSP will reboot.

 

Afterward, copy Devhook (devlauncher271.rar) onto the memory stick and get the decrypted 1.5 files from somewhere (if you need them PM me). Place them in ms:\dh\150\

 

Then all you need to do is go to the Game menu on the XMB and run Devhook 4.X for 2.71. It should open and then you can just choose 1.5 or any other firmware to run and itl stay that way till you reboot, just like the old Devhook.

 

 

 

On a side note, since 1.5 is being emulated, the 9mb or so firmware that resides in ram steals the memory from other stuff. Iv found PSPgenesis and other emulators actually run *faster* using the eLoader for 2.71. However, it is still a real copy of 1.5 for all intents and purposes, and ALL homebrew runs on it. Compatibility is far and away better than any eLoader out now.

 

 

Afterward, copy Devhook (devlauncher271.rar) onto the memory stick and get the decrypted 1.5 files from somewhere (if you need them PM me). Place them in ms:\dh\150\

 

Could i pleas have these files or where can i get then from????

[Mooney]

Afterward, copy Devhook (devlauncher271.rar) onto the memory stick and get the decrypted 1.5 files from somewhere (if you need them PM me). Place them in ms:\dh\150\

 

Could i pleas have these files or where can i get then from????

PSP-Hacks has the files you need: http://www.psp-hacks.com/category/37

[pockchow]

Afterward, copy Devhook (devlauncher271.rar) onto the memory stick and get the decrypted 1.5 files from somewhere (if you need them PM me). Place them in ms:\dh\150\

 

Could i pleas have these files or where can i get then from????

PSP-Hacks has the files you need: http://www.psp-hacks.com/category/37

 

 

Sorry i am a noob at this, i went to the web site and was confused, could you please explain it a little better as to which one or which dumper i download? im so worried abot bricking my psp.

[Mooney]

Just download this: http://www.psp-hacks.com/file/8

It's a dump of the firmware, not a dumper. Just extract the files, and place them into X:\dh\150, then run DevHook and select 1.50 for the firmware to be emulated.

[pockchow]

will i brick my psp?

[Mooney]

will i brick my psp?

Nope. DevHook does not write to your PSP's flash, so there is no chance of bricking if you use it normally. The only time you really have to worry about bricking is when you are downgrading or installing a custom firmware or firmware mod.

[pockchow]

here is one for you, i am running 2.71 on a TA-082 and installed henc and ran devhook for 2.71 i chose fw 1.5 and it rebooted fine, i then selected umd emulator and choose my iso i wanted to play, it was brothers in arms, It then said i had to update my virsion to 2.81 to play, should i do this to play and after i played it, do a hard reboot, will my psp be back to 2.71 or will it remain 2.81 ?

Edited January 7, 2007 by pockchow

[Mooney]

here is one for you, i am running 2.71 on a TA-082 and installed henc and ran devhook for 2.71 i chose fw 1.5 and it rebooted fine, i then selected umd emulator and choose my iso i wanted to play, it was brothers in arms, It then said i had to update my version to 2.81 to play, should i do this to play and after i played it, do a hard reboot, will my psp be back to 2.71 or will it remain 2.81 ?

First, do NOT update to 2.81. I'm not sure what would happen, and it might put your PSP in danger of bricking. Second, if you are using DevHook, you do not need UMD Emulator. In fact, I recommend getting rid of it, as DevHook has better ISO compatibility anyway. Now, to get any UMD ISO to work that requires a 2.xx (2.xx = 2.00, 2.01, 2.50, 2.60, 2.71, 2.80, 2.81) firmware, you must have any 2.xx firmware installed for DevHook. You can download a Windows application that will install 2.60 for DevHook onto your PSP HERE. After you install that, or any other 2.xx firmware, load up DevHook. For the firmware, select the 2.xx firmware you installed (2.60). For the UMD Select, choose your ISO (Brothers in Arms) which should be placed under X:\ISO (where X: is your PSP's drive letter). Then make sure the setting "2.xx -> 2.00" is on. That will make it so any UMD that requires a firmware that requires 2.xx will only require 2.00. Thus, Brothers in Arms will only require 2.00 instead of 2.81. Finally, hit Start to load up DevHook and load your ISO just like you would load a real UMD.

 

One last word of advice, you may want to update your HEN-C to HEN-D.

[pockchow]

Afterward, copy Devhook (devlauncher271.rar) onto the memory stick and get the decrypted 1.5 files from somewhere (if you need them PM me). Place them in ms:\dh\150\

 

Could i pleas have these files or where can i get then from????

PSP-Hacks has the files you need: http://www.psp-hacks.com/category/37

 

 

WOW you are a freak at this, but i noticed you mentioned install 2.6 firmware, i am currently on 2.71

[Mooney]

WOW you are a freak at this, but i noticed you mentioned install 2.6 firmware, i am currently on 2.71

When I mentioned installing 2.60, I meant installing it for DevHook, not for the system firmware. This file will install firmware 2.60 for DevHook (ex: so you can emulate 2.60 with DevHook)