Jump to content

MAME 0.105u4!

Recommended Posts




MAMETesters Bugs Fixed


invaders0105u2gre [Giuseppe Gorgoglione]

taitosj0105u3yel [Aaron Giles]

wardner0105u3red [Aaron Giles]


Source Changes


Nintendo 64 system improvements: [Ville Linde, Ryan Holtz]

- Fixed a major bug in the RSP core

- Rewrote the PIF handling

- Slightly improved triangle rendering


Added a NULL check on memory_set_bankptr(), memory_configure_bank() and memory_configure_bank_decrypted(). [Nathan Woods]


Added support in the debugger memory window to change the number of bytes displayed per row. [Andrew Gardner]


Started simulation of orlegend super / special protection. [XingXing, ElSemi]


Fixed colors and music tempo in Perfect Billiard. [sonikos]


Cleaned up 6840 implementation and revised scorpion2 driver's handling of unmapped regions. Also updated the MPU4 memory map. [El Condor]


Major Toaplan 2 driver cleanup: [Quench]

- Added Knuckle Bash 2 (kbash2)

- Consolidated the Read/Write memory maps

- Fixed coin counters on a few games

- Raised the volumes on a few games

- Cleaned the inputs by:

Adding input inheritance and DIPSW locations

Added conditional dependance to DIPSWs where required

Fixing a few incorrect inputs here and there


Fixed/improved DIP switches in the m92, afega, tumbleb, and yunsun16 drivers. [Twisty]


Cleaned up the liberate.c driver. [sonikos]


Improved ARM7 thumb mode disassembler. [MooglyGuy]


Some improvements to Air Raid/Cross Shooter, but not playable

due to missing gfx roms. [Tomasz Slanina]


Fixed UI positioning when artwork is enabled. [Giuseppe Gorgoglione]


Big pile of updates/improvements to the ARM7 core thumb mode and the PGM drivers. [David Haywood, ElSemi]


Improved OKI frequency in sslam and powerbls. [f205v]


More DIP switch improvements to m62.c, m72.c, ddragon.c. [Twisty]


Fixed bug in the debugger that would prevent you from typing a command line longer than what was visible. [Aaron Giles]


Added a new tool jedutil, which will convert.JED files to binary form and back again. [Aaron Giles]


Added new ROM region REGION_PLDS, which is designed to hold binary dumps of PLD fusemaps (produced from.JED files by jedutil). Added logic to -romident to automatically parse.JED files to identify them against these binary dumps. Added PLD dumps to the Vindicators, Batman, Pit Fighter, ThunderJaws, and Relief Pitcher drivers. More to come shortly. [Aaron Giles]


Converted PLDs for catnmous and lazarian to the new binary format. [Aaron Giles]




New games added or promoted from NOT_WORKING status


Tetris (D.R. Korea) [David Haywood]

Knuckle Bash 2 (bootleg) [Quench]


New clones added


Metal Slug 6 (Metal Slug 3 bootleg) [Mame32Plus]

Metal Slug 5 (JAMMA PCB) [Mame32Plus]

SVC Chaos - SNK vs CAPCOM (JAMMA PCB, set 2) [Mame32Plus]

Night Slashers (Over Sea Rev 1.2) [stefan Lindberg]

Double Dragon (World Set 2) [stefan Lindberg]


New games marked as GAME_NOT_WORKING


DoDonpachi Dai-Ou-Jou (V100) [Wu]



Derivative Builds:







History.dat 1.06n



Link to comment
Share on other sites

This bios? 268-bios.bin", CRC(b4590283)


And they are using the ms3 roms in the ms6boot


+ROM_START( mslug3b6 ) /* This "Metal Slug 6" is a hack/bootleg of Metal Slug 3, the real Metal Slug 6 is on Atomiswave Hardware */

+ ROM_REGION( 0x500000, REGION_CPU1, 0 )

+ ROM_LOAD16_WORD_SWAP( "299-p1.bin", 0x000000, 0x200000, CRC(5f2fe228) SHA1(747775a2dfc0da87ad2ddd4f57ce5b2522f23fa5) )

+ ROM_LOAD16_WORD_SWAP( "299-p2.bin", 0x100000, 0x400000, CRC(193fa835) SHA1(fb1f26db7998b0bb6b1c8b92500c1596ec5dfc71) )


+ NEO_SFIX_128K( "299-s1.bin", CRC(6f8b9635) SHA1(86b0c8c0ccac913c6192ed6a96c35d4e1a5e8061) )


+ NEO_BIOS_SOUND_512K( "256-m1.bin", CRC(eaeec116) SHA1(54419dbb21edc8c4b37eaac2e7ad9496d2de037a) )


+ ROM_REGION( 0x1000000, REGION_SOUND1, 0 )

+ ROM_LOAD( "256-v1.bin", 0x000000, 0x400000, CRC(f2690241) SHA1(fd56babc1934d10e0d27c32f032f9edda7ca8ce9) )

+ ROM_LOAD( "256-v2.bin", 0x400000, 0x400000, CRC(7e2a10bd) SHA1(0d587fb9f64cba0315ce2d8a03e2b8fe34936dff) )

+ ROM_LOAD( "256-v3.bin", 0x800000, 0x400000, CRC(0eaec17c) SHA1(c3ed613cc6993edd6fc0d62a90bcd85de8e21915) )

+ ROM_LOAD( "256-v4.bin", 0xc00000, 0x400000, CRC(9b4b22d4) SHA1(9764fbf8453e52f80aa97a46fb9cf5937ef15a31) )




+ ROM_REGION( 0x4000000, REGION_GFX3, 0 )

+ /* Encrypted */

+ ROM_LOAD16_BYTE( "256-c1.bin", 0x0000000, 0x800000, CRC(5a79c34e) SHA1(b8aa51fa50935cae62ab3d125b723ab888691e60) ) /* Plane 0,1 */

+ ROM_LOAD16_BYTE( "256-c2.bin", 0x0000001, 0x800000, CRC(944c362c) SHA1(3843ab300f956280475469caee70135658f67089) ) /* Plane 2,3 */

+ ROM_LOAD16_BYTE( "256-c3.bin", 0x1000000, 0x800000, CRC(6e69d36f) SHA1(94e8cf42e999114b4bd8b30e0aa2f365578c4c9a) ) /* Plane 0,1 */

+ ROM_LOAD16_BYTE( "256-c4.bin", 0x1000001, 0x800000, CRC(b755b4eb) SHA1(804700a0966a48f130c434ede3f970792ea74fa5) ) /* Plane 2,3 */

+ ROM_LOAD16_BYTE( "256-c5.bin", 0x2000000, 0x800000, CRC(7aacab47) SHA1(312c1c9846175fe1a3cad51d5ae230cf674fc93d) ) /* Plane 0,1 */

+ ROM_LOAD16_BYTE( "256-c6.bin", 0x2000001, 0x800000, CRC(c698fd5d) SHA1(16818883b06849ba2f8d61bdd5e21aaf99bd8408) ) /* Plane 2,3 */

+ ROM_LOAD16_BYTE( "256-c7.bin", 0x3000000, 0x800000, CRC(cfceddd2) SHA1(7def666adf8bd1703f40c61f182fc040b6362dc9) ) /* Plane 0,1 */

+ ROM_LOAD16_BYTE( "256-c8.bin", 0x3000001, 0x800000, CRC(4d9be34c) SHA1(a737bdfa2b815aea7067e7af2636e83a9409c414) ) /* Plane 2,3 */


Link to comment
Share on other sites

Yes, it's totally wrong. I mentioned it. I think it was just added so that people would pay obscene amounts of money for it.


And yes, ms5pcb is still missing the bios, the one now is WRONG.


Also, svcpcba is not confirmed, just the Cx and V1. The px and bios aren't confirmed.

Edited by iq_132
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...