Altirra 2.00 released

[Robert]

This emulates the Atari 800.

 

Get it here --> http://virtualdub.org/altirra.html

 

 

Version 2.00 [December 24, 2011]:

 

Debugger: The step over command has been changed from s to o.

 

[features]

UI: Added OS Screen size setting.

UI: Added support for gzip compressed images (*.gz, *.atz).

UI: Arrow key behavior is now configurable.

UI: Added speed options.

UI: Added option to control whether emulation sees the Shift key pressed after a Shift+F5 cold reset.

UI: Added MRU list for booted images.

UI: Color settings can now be exported as a palette file (*.pal).

UI: Display API options can now be changed through the GUI (not just cmdline).

UI: Added full screen resolution options.

UI: Added single instance option.

UI: Request 1ms system timer precision only when unpaused.

UI: Added option to bind file associations in Windows for image types.

UI: Added /run, /disk, /tape, and /cart switches to force load types on the command line.

UI: Added mute option.

Debugger: Added command aliases (ac, al, as, a8).

Debugger: Added watch expression (wx) command.

Debugger: Added multiple memory panes.

Debugger: Added watch panes.

Debugger: Initial version of debug display.

Debugger: Disassembler can now display offsets from symbols.

Debugger: Profiler now distinguishes between VBIs and DLIs in function sampling mode.

Debugger: Profiler now shows unhalted cycle counts and DMA contention rates.

Debugger: Added call graph profiling support.

Debugger: Mouse wheel is now position-based instead of focus-based.

Debugger: Address range breakpoints can now trigger commands.

Debugger: Added log output filter commands (lfd/lfe/lfl/lft).

Debugger: Added .ide command.

Debugger: Enter (e) command now takes expressions.

Debugger: Added bitwise/low-byte/high-byte operators and address/value variables to expression evaluator.

Debugger: Break on expression command (bx) can now include address ranges.

Debugger: Added dump double words (dd) command.

Debugger: Go (g) command now has options to preserve and force source mode.

Debugger: Added batch (.batch) command.

Debugger: Added source mode control (.sourcemode) command.

Debugger: Commands can now be queued to run when an EXE loads or runs.

Debugger: Source line breakpoints can now be set prior to line debug information being available.

Debugger: A matching .atdbg file is now processed when an executable loads.

Debugger: startup.atdbg in the program directory is now processed on startup if present.

Debugger: Ctrl+Up/Down from output window command line now scrolls log pane by single lines.

Debugger: Added fill (f), search (s), and move (m) commands.

Debugger: Register ® command can now set individual flags.

Debugger: Improved output of .pia command.

Debugger: Call, loop, and interrupt collapsing in history window can now be toggled.

Debugger: History window can now show timestamps in cycles, unhalted cycles, and microseconds from an anchor point.

Debugger: Extended memory syntax now allows access to hidden RAM (r: prefix).

Debugger: Added .tape and .tapedata commands.

Disk: Added support for Write PERCOM Block command.

Disk: Added option to auto-detect firmware overrides of disk accesses and automatically disable SIO patch for those drives.

Disk: Live disk images can now be explored directly from the disk drive entry rather than requiring an unmount and remount.

Disk: Disk explorer shows timestamps.

Disk: .ARC compressed archives can now be explored.

Disk: Fixed a couple of bugs with DCM disk image decoding.

Cartridge: Added another Atrax 128K cartridge variant used for SpartaDOS X.

Cartridge: Added support for OSS 8K, Blizzard 4K, AST 32K, Atrax SDX 64K, Turbosoft 64K, and Turbosoft 128K types.

Cartridge: Added support for newer MaxFlash 1MB cartridges that power up in bank 0 instead of bank 127.

Cartridge: Added support for 1M Megacart (different type with similar name).

Cartridge: Added support for a 5200 64K cartridge with 32K banks.

Input: MultiJoy8 support.

Input: CX-80 and 5200 trackball support.

Input: 1200XL F1-F4 keys can now be enabled in keyboard options.

Input: ~ key is now an alternate mapping for the inverse key.

IDE: KMK/JZ IDE / IDEPlus 2.0 emulation support.

IDE: Initial SIDE emulation support.

IDE: Solid-state mode supports up through PIO mode 6.

IDE: Read-only physical disk access.

GTIA: SECAM support.

GTIA: Optimizations to mode 9 and mode 10 rendering.

MMU: Added 800 8K/24K/32K/40K configurations.

MMU: Added 320K and 576K Compy Shop configurations.

MMU: Sped up extended bank switching.

Simulator: Added XEGS support.

SoundBoard: Multiplier support.

POKEY: Rewrote sound core to defer repeating events whenever possible for extra speed.

 

[bugs fixed]

ANTIC: Added emulation of bus data displaying at the very right border of a wide scrolled playfield.

ANTIC: Improved accuracy of mid scan line changes to HSCROL and DMACTL.

ANTIC: Fixed phantom DMA data during WSYNC.

ANTIC: Implemented phantom DMA artifacts along right side of wide playfield.

ANTIC: Fixed NMIs not being reactivated after a write to NMIRES on cycle 7.

Disk: PERCOM block is now initialized for a drive without a disk.

Disk: Fixed errors in PERCOM block track and sectors per track counts.

Disk: Switching a disk from R/W to VirtRW mode now clears pending flush errors.

Disk: Fixed incorrect serial transfer rates for XF551 high speed Put/Write and Write PERCOM commands.

Disk: Fixed H: device not handling zero-byte get/puts properly with burst I/O enabled (affected GET/PUT from BASIC).

Disk: H: device now supports OPEN with AUX1=7 to fix directory listing from DOS 2.5.

Disk: Disk explorer now properly increments volume sequence number when modifying SpartaDOS X images.

Disk: DSKINV hook now supports writes to sectors bigger than 128 bytes.

Disk: Fixed crash with very short disk images.

CPU: Fixed undocumented $BB opcode using abs instead of abs,Y addressing mode.

CPU: Undocumented $6B opcode now supports decimal mode.

Debugger: Profiler sometimes lost track of intermediate call frames during function sampling.

Debugger: Mouse wheel now uses system wheel scroll setting.

Debugger: Improved parsing of MADS listings.

Debugger: Fixed command escaping so that escapes are no longer processed unless enabled, i.e. \"foo\nbar".

Debugger: Register ® can no longer clear bits 4 and 5 of P when unsupported by current CPU mode.

Debugger: _ and . are now accepted as part of symbol names in expressions.

Debugger: Fixed crash when attempting to load empty file as symbol file.

Debugger: Source path matching now allows partial path matches both ways and has improved behavior with duplicate filenames in different directories.

Debugger: Fixed wrapping of frame counter in history window.

Debugger: Built-in kernel symbols now take priority over loaded symbols.

Debugger: Fixed page scrolling in history window after enabling CPU history tracking.

IDE: Added mandatory Recalibrate, Read Verify, Read Multiple, Write Multiple, Seek, Set Multiple Mode, and Initialize Device Parameters commands.

IDE: Fixed response from device 1 status register.

IDE: Improved response from Identify Drive command.

IDE: Set transfer mode command is now supported.

Cartridge: Reverted OSS 034M mapper back to original bank order and added OSS 043M mapper mode for alternate bank layout.

Input: Fixed crash when activating triggers to unavailable controllers.

PIA: Implemented IRQB and control bit 6.

HLE: Fixed escape handling in display handler.

HLE: Screen setup now matches the display list and playfield addressing of the stock OS ROM.

HLE: Fixed cartridge handling so that cartridges are run after disk boot completes.

HLE: Added known RTS instruction at $E4C0.

HLE: CIO now allows SPECIAL commands to be issued on a closed IOCB.

HLE: Boot loader now sets DBYTLO/DBYTHI to $0400 before launching.

HLE: Fixed crash in CIO on OPEN command with unknown device.

HLE: S: now supports the Get Status, line, and fill commands.

UI: Disk sector display was incorrect for accelerated writes.

UI: Fixed crash if DirectX 9 is not installed.

UI: Display window can no longer be undocked in full screen mode.

UI: Adjusted default NTSC color preset. The old preset is still available.

UI: Command-line processing now better matches standard VC++ escaping rules.

UI: Direct3D9/OpenGL rendering now works over Remote Desktop with Windows Vista/7.

SoundBoard: Restricted $D5/D6xx mapping to $D500-D53F and $D600-D63F.

POKEY: Fixed incorrect latching on IRQST bit 4 (serial output ready IRQ).

POKEY: Fixed deassert timing for IRQST bit 3 (serial output complete IRQ).

POKEY: Added partial emulation of SKSTAT bit 4 (direct input) during disk transfers.

Cassette: Fixed data blocks being silently dropped when reading some .cas files.

Cassette: Fixed inaccuracy in data rate produced from loading .cas files.

GTIA: Fixed incorrect color for %%1000 pattern in mode 10 with lores ANTIC input.

VBXE: Warm reset no longer resets all registers like a cold reset.