alundra
-
Posts
60 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
Blogs
Downloads
Posts posted by alundra
-
-
hi, i just installed a xenium ice on my v1.6, now what i need to do to be able to play backup cause my xbox havent able to play any type of cdr, or dvdr yet...thanks
-
i went to another radio shack and i found a roll of 30 gauge wire..doesnt say AWG or kynar anything...will this one work..thanks.
-
radio shack does
are you sure, i checked yesterday, all they have are those 18, 20, 24 gauge wire, and the type is AWM or Cl-2x something, i didnt even see any wire that say kynar or neither AWG..
but any you do think it will be fine if i use the 24 gauge wire...?
-
any body know any store that sell this wire, but not from internet though..thanks
-
assuming my xbox is screw up because i modded my xbox..can the xbox work as normal if i remove the chip? thanks
-
does anyone know of any stores right in miami florida that sells mod-chip so that i can go there an purchase 1 ?
i plan to install the mod chip myself if i can't find anyone back home in my country the bahamas to do so. so whats the best close to being almost easy to install mod-chip to purchase.
the xenium ice solderless is probably the easiest one to install out there..its 59 dollars..
-
Crossover Cable
Crossover cables look like normal network cables except they are usually some sort of odd color. Many are yellow or orange. These two are orange, I have a yellow cable myself. Both standard and crossover cables have RJ45 connectors on the end.
wow thanks..i forgot about bestbuy..and it near my house too..
-
thanks guys..still trying to find that cable though...
-
rj45 is the jack the cable uses, crossover cable is a like a y cable with rj45's on them
im confuse right now, as i know nothing about networking and such...
i went to radion shack and asked a guy about the crossever cable, that guy know nothing, he pointed me to a ps2 cable extension
could you show me to a link that has a picture or details of the cable...thanks -
ive heard some people say RJ 45 is a crossover cable for xbox, but im not sure...
-
The game will never beat any KOF 2D in my opinion.
The combo is just crap!!
i totally agree there..2D kof is the best...
-
i went to wal-mart today to look for the crossover cable..and i saw one that say Ethernet Cable RJ45 Male/Male and about 14 feet long...is this the right one to buy? thanks
-
as you can see the pic below..all the pins were completely cover by solder..so is that means if i solder my pins on my xbox..i have to do samething like in the picture below..and does it have to look like that or it doesnt matter as long as i put solder around the root of the pins..thanks
-
thanks for advice..i have one more question...i you solder the pin header..does you pin headers were cover all by solder or you just apply the solder at the root of the pins and leaves the rest expose as they were...thanks
-
can you give me some advice to solder those holes on xbox, i practice on a circuit board and i try to fill to solder into the holes but it didnt stick into the hole..what method did you used..i dont want to mess up my xbox..thanks
-
i have that game, i bought from game stop completely new..and it doesnt work, i pop in my psx, it play a intro movie then after that i got a black screen..
-
im going to solder a chip on my xbox..i also soldered a chip on my old playstation which is a little difficult for me cause the points to be solder is so small...so i just wondering(to those who has installed chip on both playstation and xbox) which one is harder to solder? the xbox chip or the playstation chip? thanks
-
ok, im getting confuse here.. so what is the point for knowing the version when you already modded your chip..the main reason i want to know my xbox version is that i want to install a modchip on my xbox, in the modchip's installation tutorial tells that i need to identify my version first before installed so that i know which to solder and which not because the motherboard is different in each version...and yea..im completely new to xbox so i never burn any xbox iso before..any tips would be great...thanks..
-
You can also use a little program called XBox Version Detector. Just download it using that link and then run it on your XBox.
and can you tell me what should i do with it, burn it to a cd and load it in the xbox or what? thanks
-
u can tell by the last digits of the serial number
where its locate at? im talking about the version number that shows on the motherboard, i cant find where it locate and whats it looks like...thanks
-
im completely new to xbox, so just a quick question, how do i know the version of the xbox, i tries to look for a xbox version from 1.4 to 1.6..
-
i think that is pirate disc, because i've bought some psx pirate discs in vietnam (all the games over there are back up by pirate), all the label of the disc look just like this one, they all look crappy and stuff and the labels stick into the surface of the discs that you cant scratch or anything just like you mentioned..
-
thanks..anyway i still have no clue why it didnt work when i created nrg image, but i finally got it to work..i downloaded the discjuggler version and burned down with alcohol 120 because for some reason i cant burn it with discjuggler..and it work perfect on my dreamcast
-
ok, ive burned like over 10 cd already, but none of them work on my DC. and i dont know whats wrong here..ive downloaded the "The Best Damned NesterDC Tutorial Ever Written" at dcemulation.com and followed exactly what it says in the tutorial. then burned to cd using nero...and of course it didnt work on my DC..what strange thing is when the cd is burned, i pop it back into the cdrom drive to browse it, but cd is empty, i didnt see any kind of file in the cd even though it was finished written..can some one please help me..
i also have Easy CD Creator, is there a way i can create image in that program? please help..thanks
how to play backkup
in XBOX Hacks [/xbox]
Posted
thanks for the info...