noecoke
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
Blogs
Downloads
Posts posted by noecoke
-
-
NO I don't get the qoob menu, I only get the default option menu screen. The disc doesn't spin either. Even after I reset. When I go to game options with a disc inside, I only get a question mark and it says insert game cube disc.
thanks
-
Hello, I just installed a qoob pro on my version c cube and have run into problems. I flashed the chip using the v 13 bios and then tried playing an original game RE4. When I power up the cube, the disc doesn't spin and all I get is the default screen where it has the options to set the date and view your memory card and such. I can see that the led on the chip is on and when I read the chip using the software it says that it has the bios installed on the first box. Any suggestions? Do I need to flash the chip with anything else besides the bios? I can't find much information. Your help is greatly appreciated. thanks in advance.
-
Are there any closer alternative ground and power points besides the one on the official duo se 2 website diagrams. The power point goes from one end of the board to the other. thanks.
-
Can anybody help me with my duo 2 se install. I used the diagram on their website on a v7 ps2. I used 30 awg kynar wire for everything except the ground and power points. I used 24 gauge wire there. Anyways, The ps2 turns on but all I get is a black screen. I checked to see if there was any leakage on the bios or solder points but everything is fine. Could it be a bad chip? I heard that maybe the ground wire is too long and that's why it doesn't work. Any tips on how to find out what's wrong with the install. Thanks in advance.
-
thanks IJTF_Cinder
I did some searching and ordered a 15 watt Hakko N453 with a 1 mm bevel tip. Hopefully all goes well. thanks for the tip.
-
I wanted to know if someone can recommend a good soldering iron to use on my v7 ps2. Also what size soldering tip should I use. A price range of about $50 to $60 prefferably. thanks.
-
I checked the vmm for my mamedox and still couldn't get sf1 to run properly. I changed the vmm.txt and nothing. Maybe it could get fixed on the next mamedox release.
-
I have a 128mb box with 2 version of mame on there. I use mame71.1b to play my mk games as they work perfect there and also sf1 works great! And I have the new mamedox and can tell you that sf1 DOESN"T WORK PROPERLY. it lags as if I didn't have the 128 ram upgrade. The mk series don't work either, but I know it's because of the drivers. Bendermike, I'd be happy to test that private xbe and post results.
-
Ok I've read about emulation on the dc but I haven't seen anything on modifying the actual console. Do you need to install a modchip on the dreamcast? Is there a reliable site that sells them? Thanks.
qoob pro install gone wrong?
in Wii & GameCube Emulators [/pc/wii+gc]
Posted
Well you were right. I resoldered points e and f and well as b and a and now it works!! Thanks.