dude you dont have a problem. you have a solderless xecuter 2.3 lite plus. sometimes if you move the system the chip can come out of allignment all you need to do is if you are bringing the system out with you carry a screwdriver kit so that you can open it up and put the chip in the right position. with the power on turn the chip off (the outside board, turn the first switch to right). keep moving the chip until you see two blue lights and a green light shining on the chip inside (you will only get the green light with the chip in the off position) make sure you tighten the chip in the right position so that it dont come out of position again. and that is it.
