[CoinOPS 2 (old dev site)]

eparox you will need to put one rom at leat into your roms folder....sorry I added a feature when it doesnt detect any roms it reboots.....(I didnt think about your situation...sorry just people complaining it locks up if as they try and move up or down with no games)

 

what I would do is put one rom in CoinOPS 2/roms/xxx.zip .... build the build

 

then after its runs...dont launch the emu or or will remove the save and rebuild due to the rom limits....I would then add all the rest of the games to your other drive.....setup in advanced settings the path then rescan....when you see all 2200 plus games are loaded you can play the emu

 

 

Tonight I will set up a PSX/N64 thread...alot of progress is happening on N64 at present....I might change the save...

PS I think pixel perfect is not worth it on N64 whats peoples thoughts.....N64 looks so much better in HD

 

 

Thanks BP, was able to get it to work

Putr coinops 2 and roms on f drive under apps

opened with xbmc...was able to run no problem

very nice...thanks for all your work

[CoinOPS 2 (old dev site)]

you dont have to edit any ini to change your roms folder, BP put an option in the advanced settings, so you can set your folder, even if its on another partition..

 

I have used that option in past versions...but I can not get coinops2 to get past the scanning for roms that one sees when starting the program for the 1st time...after it scans it goes back to the start screen...when I press start it scans again then back to the start screen...even after deleting the babe/boob files in Ucayali

 

Thoughts?

[CoinOPS 2 (old dev site)]

1st thanks BP for your time and effort

 

2nd I am in need of some help

In the past forcoinops I would put everything except the Roms in the e partition

I would put the rom's on the f partition and when coinops opened I would point it to the correct path

 

With coinops 2 the program will not get past the scanning for Roms screen when I place the roms on the f partition....so I placed the complete program plus roms on f/apps but still can't get past the scanning for Roms screen.....do I need to edit the ini. file to point to the f partition......basically can coinops 2 be run from the f partition and if so how.........

 

Thanks for your time

[CoinOPS 2 (old dev site)]

1st thanks BP for your time and effort

 

2nd I am in need of some help

In the past forcoinops I would put everything reception the Rome on the e partition

I would put the Tom's on the f partition and when coinops opened I would point it to the correct path

 

With coinops 2 the program will not get past the scanning for Roms screen when I place the roms on the f partition....so I placed the complete program plus roms on f/apps but still can't get past the scanning for Roms screen.....do I need to edit the ini. file to point to the f partition......basically can coinops 2 be run from the f partition and if so how.........

 

Thanks for your time

[CoinOPS 2 (old dev site)]

NEW FEATURE - Added a path in the GUI for other cores....

 

 

Thank you

[CoinOPS 2 (old dev site)]

doom...midway....fba core and all console cores point to CoinOPS/roms in your build at present and cant be changed from memory so anything with a _ in the name of the rom...

 

Ok, Thanks again for the clarification

And thanks for great product and your continued improvement of it

[CoinOPS 2 (old dev site)]

Is there a way to run the n64/midway/ and other consoles roms from the f partition

 

the PSX files allow you to select but the other consoles seem to require the D partition even with the rom paths specified in the coinops setup screen.

 

thanks

 

 

I'm running CoinOPS Epic off of the F drive with no problems. You don't have to make any changes to the paths in the settings, just make sure that you're using the right naming convention when adding roms.

 

 

I should have been more specific. My xbox drive is partitioned with only 1GB left in E but 98 left on F:

Normally I put the coiopns files under games on the e partition and point it to the roms which i place on the F drive

It works for the arcade games but not for the other systems....if i put the other system games on the E under the coinops directory they work fine

 

any thoughts are appreciated

 

 

Ah, gotcha. I just tested it out with your setup and it worked fine for me.

 

Setup: CoinOPS installed on E: and roms installed on F: - I put the NES rom Faxanadu (great game btw), renamed to NES_Faxanadu, in F:\roms. Within CoinOPS I changed the second rom path to F:\ROMS (I used all caps, i don't know if it's case sensitive) then I scanned for new roms and it showed up just fine. Hope this helps...

 

 

 

 

 

Thanks for the test....I did not try nes

If you have a min will you please try either an n64/midway/turbo duo cd game and post if it works

Thanks for your time

[CoinOPS 2 (old dev site)]

Console cores only point to CoinOPS/roms folder at present its fixed in my build as a place holder and proof of concept

 

Thanks all

[CoinOPS 2 (old dev site)]

Is there a way to run the n64/midway/ and other consoles roms from the f partition

 

the PSX files allow you to select but the other consoles seem to require the D partition even with the rom paths specified in the coinops setup screen.

 

thanks

 

 

I'm running CoinOPS Epic off of the F drive with no problems. You don't have to make any changes to the paths in the settings, just make sure that you're using the right naming convention when adding roms.

 

 

I should have been more specific. My xbox drive is partitioned with only 1GB left in E but 98 left on F:

Normally I put the coiopns files under games on the e partition and point it to the roms which i place on the F drive

It works for the arcade games but not for the other systems....if i put the other system games on the E under the coinops directory they work fine

 

any thoughts are appreciated

[CoinOPS 2 (old dev site)]

Is there a way to run the n64/midway/ and other consoles roms from the f partition

 

the PSX files allow you to select but the other consoles seem to require the D partition even with the rom paths specified in the coinops setup screen.

 

thanks

[The Ressurection has begun....]

Has anyone gotten Dracula X to work in the Res Xtras

Every time I try to load (under the translated folder) it state "run error" on the turbo duo loading screen

 

Any thoughts?

[Made a Youtube video about XBMC!]

Nice vid.

 

Have you gotten Drac X to work with the Res Xtras?

[My 1.4ghz 128mb trusty board]

where can one find more info on this mod from trusty

 

and anyone know where you can find hdd compatibile with xbox know and days

 

thanks

 

parsox

email him at trustyty@hotmail.com

and check out the hdd compatibility list here:

http://xboxdrives.x-pec.com/?p=list

 

thanks man

[The Ressurection has begun....]

ditto,

 

inquiring minds want to know

 

 

thanks all

[My 1.4ghz 128mb trusty board]

where can one find more info on this mod from trusty

 

and anyone know where you can find hdd compatibile with xbox know and days

 

thanks

 

parsox

[CoinOPS reignite Updates Unofficial thread..]

I don't post much but had to add my 2 cents

 

I am greatfull to BP/IQ and Fumanchu for spending the time to improve the program and bring it to the masses.

 

BP has been kind enough to provide a free program that plays alot a great games

 

why antagonize the man...its free and he tries to improve it as he can

 

say "thank you" and be satisfied with what is provided

[***CoinOPS reignite OFFICAL FORUM ***]

so can anyone think of any other games to add to coinops because i cant think of anything else..

 

 

Don;t know if its available but

 

Stun Runner?

 

 

And THanks

 

FU

IQ and BP

 

for everything

[CoinOPS IGNITE R5]

thanks fumanchu for getting me squared away

[CoinOPS IGNITE R5]

thanks for the info BP

 

will try that route

[CoinOPS IGNITE R5]

First off thanks BP for all your hard work, outstanding

 

I recently updated from coinops gold to ignite r5 but notice some games that used to work previously (such as all the metal slugs) now indicate they are missing files.

 

will someone direct me on how to correct this

 

v/r

[MAMEdOX Platium THREAD]

I'd prefer any working roms already added. Beats trying to find the right version needed of the rom.

 

just my 2 cents

 

parsox

[MAMEdOX Platium THREAD]

Excellent

 

I appreciate the effort and time.

 

You hear that everyone. 7 days to request the possability of adding a couple more games if they run ok ..SO GET THEM IN.

 

v/r

Parsox

[MAMEdOX Platium THREAD]

Its great to be able to play and not worry about the correct rom.

 

If you get enough input on games for a patch would you consider the follwing:

 

Columns 1,2 or 3

The real ghostbusters

Qix

Revolution X

Terminator 2

 

thanks

 

/r

Parsox

[MAMEdOX Platium THREAD]

Thanks BrtineysPairs for this fine emu. Its great to be able to just play a game without sreahcing multiple versions of the same rom.

Your work is appreciated.

 

Do you plan on adding more games in the future?

 

/r

Parsox

[No files available on newsgroups]

Doh ! Sorry about this thread. Supposed to be under mamedox platinum.

 

/r

 

Parsox