Jump to content

compersite lead and 720


ace9094

Recommended Posts

how do i output in 720?

 

is it an option im over looking?

 

 

thanks

damn right its an option you are overlooking and it is very easy to do,xbmc,emulators all look great in 720phd well thats what i set mines at you can have 1080i if you wish.also a lot of xbox games display in hd games like soul calibur 2,dead or alive ultimate,dead or alive 3,ninja gaiden black.....loads in 720p hd.

get a xbox component cable from ebay.

 

once you get a compnent cable then you have to do the following steps,this is presuming you have a pal xbox.

1.get a hold of the video switcher app(i can help with that)then set your region to ntsc with this app.

2.then you will need the xbox retail dash,you might have it already on your xbox but again very easy to get a hold of.once in the retail dash go to video settings and set all the hd modes on in other words 480p,720p and 1080p.

3.then reboot and viola your done.obviously make sure you have the component cable set up first.

Link to comment
Share on other sites

how do i output in 720?

 

is it an option im over looking?

 

 

thanks

damn right its an option you are overlooking and it is very easy to do,xbmc,emulators all look great in 720phd well thats what i set mines at you can have 1080i if you wish.also a lot of xbox games display in hd games like soul calibur 2,dead or alive ultimate,dead or alive 3,ninja gaiden black.....loads in 720p hd.

get a xbox component cable from ebay.

 

once you get a compnent cable then you have to do the following steps,this is presuming you have a pal xbox.

1.get a hold of the video switcher app(i can help with that)then set your region to ntsc with this app.

2.then you will need the xbox retail dash,you might have it already on your xbox but again very easy to get a hold of.once in the retail dash go to video settings and set all the hd modes on in other words 480p,720p and 1080p.

3.then reboot and viola your done.obviously make sure you have the component cable set up first.

 

 

Enigmah video switcher is the program you need.

some game can also run in 1080, Dragons lair 3D comes to mind, there are others but cant remeber them

 

 

Thanks guys....

 

Fu once again your the man !

 

thanks dude... :(

Link to comment
Share on other sites

  • 4 weeks later...
put all my boxes into HD..... SWEEEEEEETTTTTTTTTTTTTTTT :)

 

Now to try and make a slim box :P

 

Thanks Fu appeciate all the help !

 

like these :D

 

IMG_5315.JPG

 

IMG_5328.JPG

 

I've got 22 xboxs about half with dodgy dvd roms so i slim them .

Link to comment
Share on other sites

like these :P

 

I've got 22 xboxs about half with dodgy dvd roms so i slim them .

Wow sexy! :D , i thought reducing the size by removing the crappy old dvd myself, but we must also cut the internal metal casing.

You need to belittle the hard disk too, seems a lot of work. What tools were used to get a clean cut like this ?

You could post a picture of the inside, i am curious.

Link to comment
Share on other sites

like these :P

 

I've got 22 xboxs about half with dodgy dvd roms so i slim them .

Wow sexy! :D , i thought reducing the size by removing the crappy old dvd myself, but we must also cut the internal metal casing.

You need to belittle the hard disk too, seems a lot of work. What tools were used to get a clean cut like this ?

You could post a picture of the inside, i am curious.

 

Not hard at all and only takes about 15-20mins, hdd is still full size 3.5 ".

 

I wrote up a diy guide here - XBOX SLIM

 

I use a cheap dremel copy but a hacksaw , tinsnips and a file do just as well.

Link to comment
Share on other sites

nice job.... might try this :D

 

Garcimak hope your cool buddy

Yup, have a little time to screw around and play.

Hope I'll finish my cab before you, wanna race ?

Still a matter of inserting the frame tv (tricky stuff to do)

and it'll all set. we're in good hands. :P

 

Not hard at all and only takes about 15-20mins, hdd is still full size 3.5 ".

 

I wrote up a diy guide here - XBOX SLIM

 

I use a cheap dremel copy but a hacksaw , tinsnips and a file do just as well.

 

Kudos hangover, looks good and easy.

027.jpg

get a finish like that, it fits nicely.

Edited by Garcimak
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...