Jump to content

SvC Plus on Kawa-X (xbox emu)


N3oGhost

Recommended Posts

Just toiled for hours trying to get the SVC Rom to work using Soyokaze's Strikers 1945 renaming method with no luck. I got the P1/P2 roms and the modified default.xbe necessary from Bahn Yuki, uploaded it, got nothing several times. I tried them both on my patched/updated and unpatched SVC Roms, every time, Kawa-X freezes while loading 254-p2.bin. I seriously tried everything, even just flashed the newest Xecutor BIOS to see if it was just incompatible with my older one, still nothing.

 

If anyone has had my problem (freezing while loading 254-p2.bin) and fixed it, please let me know. I guess I will try out the packs when they come out tomorrow, but I have a feeling they won't work for me =/

Link to comment
Share on other sites

  • Replies 308
  • Created
  • Last Reply

Top Posters In This Topic

well the one Bahn Yuki sent you i sent to him and it works fine and in fact its the very same one Soyokaze used and changed to get svc working. at the most it sounds like you either got a bad p1 and or p2 or you didn't delete the tdata 0000fa7e

 

besides that i think its best to wait till the kawa-x plus is released so you can enjoy it and many other roms :o

Link to comment
Share on other sites

I did use the EXACT same p1 and p2 files that Bahn Yuki uses (after trying my own for an hour or so) and the EXACT same default.xbe. I also deleted the 0000fa7e folder in TDATA several times, pretty much every time I tested it. I really hope this pack will have some magic.

Link to comment
Share on other sites

I did use the EXACT same p1 and p2 files that Bahn Yuki uses (after trying my own for an hour or so) and the EXACT same default.xbe.  I also deleted the 0000fa7e folder in TDATA several times, pretty much every time I tested it.  I really hope this pack will have some magic.

Try to check with this tutorial :

 

 

To play ROTD & SVC with the same default.xbe :

 

 

1) For SVC :

 

Rename all the SVC romset (with svc_p1.rom of 6 Mb cut in 2 parts to make P1 of 1 Mb + P2 of 5 Mb) like romset of Garou MOTW prototype (garoup.zip) & edit Kawa-X default.xbe :

 

Lines of the original default.xbe :

 

0x00137BB0 : 0A00000074A50D000000000000000400

0x00137AE0 : 00005000000000000A00000098A50D00

0x00137B00 : 8CA50D00000010000000400065E58DBF

 

Lines of the modified default.xbe :

 

0x00137BB0 : 0A00000074A50D000000000000000200

0x00137AE0 : 00006000000000000A00000098A50D00

0x00137B00 : 8CA50D00000010000000500065E58DBF

 

Kawa-X will launch SVC instead of Garou MOTW prototype.

 

Explanations about the changes in the modified default.xbe for SVC :

 

Garou MOTW prototype : 0x00137BB0 : "2" -> M1 size

Garou MOTW prototype : 0x00137AE0 : "6" = P1 + P2 size (Rom Region P)

Garou MOTW prototype :0x00137B00 : "5" -> P2 size

 

 

2) For ROTD (Rage of the Dragons) :

 

Use those following romset of ROTD :

 

rod_c1.rom (EC9D18C0)

rod_c2.rom (B1069066)

rod_c3.rom (7E636D49)

rod_c4.rom (76892FDA)

rod_c5.rom (469061BC)

rod_c6.rom (2200220A)

rod_c7.rom (EDDA4BAF)

rod_c8.rom (82B1BA22)

rod_m1.rom (EBAEC46F)

rod_p1.rom (1BD7512D)

rod_p2.rom (2AB0625B)

rod_s1.rom (C155D4FF)

rod_v1.rom (5C77A3FE)

rod_v2.rom (A9B7AF14)

rod_v3.rom (17AFF92A)

rod_v4.rom (BC6A091E)

 

Rename all those roms like roms of Strikers 1945 Plus predecrypted (s1945pn) :

i.e. : rod_v4.rom -> 254-v4.bin etc... rotd.zip -> s1945pn.zip.

 

Then, edit Kawa-X default.xbe with a hexa editor :

 

Lines of the original default.xbe :

 

0x0013A678 : 0000000000005000000000000A0000006C9F0D00

0x0013A68C : 0000000000001000FFFC8EFF02000000609F0D00

0x0013A6A0 : 0000100000004000DDD4DFEF0200000000000000

0x0013A9E8 : 000000000000000000005000000000000A000000

0x0013A9FC : 6C9F0D000000000000001000FFFC8EFF02000000

0x0013AA08 : 609F0D000000100000004000DDD4DFEF02000000

 

Lines of the modified default.xbe :

 

0x0013A678 : 0000000000008000000000000A0000006C9F0D00

0x0013A68C : 0000000000004000FFFC8EFF02000000609F0D00

0x0013A6A0 : 0000400000004000DDD4DFEF0200000000000000

0x0013A9E8 : 000000000000000000008000000000000A000000

0x0013A9FC : 6C9F0D000000000000004000FFFC8EFF02000000

0x0013AA08 : 609F0D000000400000004000DDD4DFEF02000000

 

After all those changes, Kawa-X will launch ROTD instead of Strikers 1945 Plus predecrypted.

 

Explanations about the changes for ROTD in the modified default.xbe:

 

Strikers 1945 Plus : 0x0013A678 : "8" = P1 + P2 size (Rom Region P)

Strikers 1945 Plus : 0x0013A68C : "4" -> P1 size

Strikers 1945 Plus : 0x0013A6A0 : "4" -> P1 size again, just before P2 size -> Like in a Dat. file for Winkawaks or Nebula : 100000,400000,efdfd4dd,0

Strikers 1945 Plus predecrypted : 0x0013A9E8 : "8" = P1 + P2 size (Rom Region P)

Strikers 1945 Plus predecrypted : 0x0013A9FC : "4" -> P1 size

Strikers 1945 Plus predecrypted : 0x0013AA08 : "4" -> P1 size again, just before P2 size -> Like in a Dat. file for Winkawaks or Nebula : 100000,400000,efdfd4dd,0

Link to comment
Share on other sites

xboxcavalier Posted on Dec 1 2003, 10:14 PM

  OK, today I had the hardware test menu pop up in kawa-x when playing SVC, and my g/f just told me it happens all the time to her. What have we done, and how do we access this any time we want to?

 

hitting the right stick to the left make it happen

Link to comment
Share on other sites

Listen to Gouki.....thats exactly what i did to get ROTD and SVC runnin together.

 

***also want to credit Gouki for helping me understand the process of making these hex changes w ROTD and also getting the right P roms for ROTD, etc...

 

thanks again man.

Edited by N3oGhost
Link to comment
Share on other sites

OK, I've got a consolized 2 slot sitting here, anyone figured out how to get the Unibios to work on the Xbox? I've got it in this 2slot, it's great.

lol..yea i got a 5-slot in my crap.......all i gotta do is click on Right Stick and return to menu!

 

lol

 

i havent actually used the uni-bios.......no need since you can return to menu to select another game....... <_<

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...