Jump to content

I need help with FBAxxxPro


Recommended Posts

So I had a hdd failure, and finally found a cd-rw that my xbox would see, and installed my modded dash all over again, but I swear I didn't have this much trouble getting my Metal Slug roms to load up in FBAxxx before.

 

Can someone tell me what I would need to get (not WHERE to get it) so that I can run these games?

 

I might be using the wrong rom version or something, but I have no clue how to check that, right now I have:

 

FBAxxx Pro 1.28

 

Neogeo rom

 

Metal Slug - Super Vehicle-001

Metal Slug 2 - Super Vehicle-001/II

Metal Slug 4 - Plus (bootleg)

 

 

They show up, but when I try to load the Metal Slug rom, I get

 

"Launching Game...201-p1.bin was not found"

"201-s1.bin was not found"

"201-c1.bin was not found"

"201-c2.bin was not found"

"201-c3.bin was not found"

"201-c4.bin was not found"

"201-m1.bin was not found"

"201-v1.bin was not found"

"201-v2.bin was not found"

"neo-po.bin was not found"

"neo-epo.bin was not found"

"neo-debug.bin was not found"

"uni-bios.22 was not found"

 

 

Metal Slug 3 says:

 

"263-m1_decrypted.bin was not found"

"neo-po.bin was not found"

"neo-epo.bin was not found"

"neo-debug.bin was not found"

"uni-bios.22 was not found"

 

 

 

And none of them work... So I don't know if I am using unsupported roms...

 

Yeah, call me a noob... Cause I am lost.

Link to comment
Share on other sites

So I had a hdd failure, and finally found a cd-rw that my xbox would see, and installed my modded dash all over again, but I swear I didn't have this much trouble getting my Metal Slug roms to load up in FBAxxx before.

 

Can someone tell me what I would need to get (not WHERE to get it) so that I can run these games?

 

I might be using the wrong rom version or something, but I have no clue how to check that, right now I have:

 

FBAxxx Pro 1.28

 

Neogeo rom

 

Metal Slug - Super Vehicle-001

Metal Slug 2 - Super Vehicle-001/II

Metal Slug 4 - Plus (bootleg)

 

 

They show up, but when I try to load the Metal Slug rom, I get

 

"Launching Game...201-p1.bin was not found"

"201-s1.bin was not found"

"201-c1.bin was not found"

"201-c2.bin was not found"

"201-c3.bin was not found"

"201-c4.bin was not found"

"201-m1.bin was not found"

"201-v1.bin was not found"

"201-v2.bin was not found"

"neo-po.bin was not found"

"neo-epo.bin was not found"

"neo-debug.bin was not found"

"uni-bios.22 was not found"

 

 

Metal Slug 3 says:

 

"263-m1_decrypted.bin was not found"

"neo-po.bin was not found"

"neo-epo.bin was not found"

"neo-debug.bin was not found"

"uni-bios.22 was not found"

 

 

 

And none of them work... So I don't know if I am using unsupported roms...

 

Yeah, call me a noob... Cause I am lost.

 

Hi ^_^

 

You have to use the DATs off FBA-XXX Pro and scan your romsets with, especially your neogeo.zip ( i can see in your error message that some bios are missing) :)

Link to comment
Share on other sites

neo-po.bin

neo-epo.bin

neo-debug.bin

uni-bios.22

 

Aren't even in my neogeo rom/bios...

 

I have:

 

000-lo.lo

asia-s3.rom

sfix.sfx

sm1.sm1

sp-e.sp1

sp-j2.rom

sp-s.sp1

sp-s2.sp1

sp1.jipan.1024

usa_2slt.bin

vs-bios.rom

 

 

And I may be wrong, but I was positive that I leave all of these zipped...

 

And my last statement, I don't remember how to scan my roms with DAT files... I know I have two of them, and I "think" I scanned them, and all it says is "re-scan roms". I have it setup to not show broken roms, and I know this is easy to fix, I just don't remember how to get it up and running right..

 

It's been a while since I booted up my xbox with it working, I just can't remember. I need to "sudo apt-get install fbaxxxproropmpackage" or something... (stupid joke)

Link to comment
Share on other sites

Did you turn off the CRC checking in the FBA-XXX settings?

Maybe it can help...

 

Cheers,

Cospefogo.

 

No, but I tried after reading your post, didn't do anything.... Thanks though

 

 

Ok...

Maybe you should do the following:

- Make a very clean install of FBA-XXX 1.28

- Go to BT-Sky and get the full FBA set started/seeded by the user VIDIKRON

- Use the roms from there.

- Turn off the CRC Check

 

(I hope that my three phrases above are not against the Forum rules...)

 

It will work for sure.

Cospefogo.

Link to comment
Share on other sites

Cospefogo is it the same roms as you were using before on that version of fbaxxxpro?

if it is then this is a strange problem.

 

 

Did you mean him or me? lol

 

I would love to say Yes with some certainty, but I was just FTP'ing to the box off of unlabeled dvds. So it's really possible that the roms are wrong, except the ms3 rom, it's the only version I ever had, and I know it worked with this version of FBA.

 

I know I'll need to find/fix my neogeo stuff, cause none of my roms are seeing it, but they aren't finding the actual files they are looking for within the rom rar's either.

Link to comment
Share on other sites

@slinkey1981.1 solution would be to download BAED3b as that has the full neogeo romset and cps1 and cps2 games and also all of those cave shooters.its an older version of fba but its worth a try.

Link to comment
Share on other sites

@slinkey1981.1 solution would be to download BAED3b as that has the full neogeo romset and cps1 and cps2 games and also all of those cave shooters.its an older version of fba but its worth a try.

 

Yeah... that's like 3.6 gig ISO (maybe I was looking at the 3a), which really sucks, cause I am currently forced to use satelite with a 385Meg cap before I FAP my units internet...

 

Thank you for the help, but downloading that ISO is not really something I can do right now.

 

 

----------------------------------------------------------------------

 

I got Metal Slug 1 and 2 working... thanks for the different options guys.

Edited by slinkey1981
Link to comment
Share on other sites

And I may be wrong, but I was positive that I leave all of these zipped...

 

No you're absolutly right, let them zipped ;)

 

And my last statement, I don't remember how to scan my roms with DAT files... I know I have two of them, and I "think" I scanned them, and all it says is "re-scan roms". I have it setup to not show broken roms, and I know this is easy to fix, I just don't remember how to get it up and running right..

 

Install Romcenter, add your DAT with browser. Then click on file, preferences and finally the romsets panel, and select the "split" option (also take a look at reparation panel, the only option i don't personnaly use is "create fake roms"). Then you're ready to scan romsets.

 

I need to "sudo apt-get install fbaxxxproropmpackage" or something... (stupid joke)

 

lol, it would be great :thumbsup1:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...