maf Posted July 26, 2006 Share Posted July 26, 2006 (edited) Hi, I just installed MAME32 Plus! 0.107, but in this build the display settings are slightly different and I can't find where the scanlines option is (probably due to the new rendering sytem, which I don't really understand...). Under the Direct3D settings in 0.106 and below, there was a dropbox called Effect and I could choose 'Scanlines 25%', but it's not there in the new dialog. Can someone help me out with scanline settings, please Cheers! Edited July 26, 2006 by maf Link to comment Share on other sites More sharing options...
Robert Posted July 26, 2006 Share Posted July 26, 2006 It isn't there any more. Link to comment Share on other sites More sharing options...
maf Posted July 26, 2006 Author Share Posted July 26, 2006 Yes. Doing a bit of light reading helps. MAME 0.107 has a new rendering system and doesn't have the scanlines option anymore (apparently this is good news for owners of LCD panels and not-so-good news for those of us still with CRT monitors). Link to comment Share on other sites More sharing options...
rubiocroft Posted November 9, 2006 Share Posted November 9, 2006 why do you want scan lines anyway? It doesn't look good for sure,,!! Link to comment Share on other sites More sharing options...
megaman_zer0 Posted November 9, 2006 Share Posted November 9, 2006 topic revivals are bad please don't do that unless you have something useful to add Link to comment Share on other sites More sharing options...
Recommended Posts