Jump to content

Xecuter 2.6 CE (SOLDERLESS!)


1InuYasha

Recommended Posts

i have a version 1.0 or 1.1 XBox with the holes filled an so i was wondering how could my Xecuter 2.6 CE (SOLDERLESS!!) and the XAPTER SOLDERLESS ADAPTER work on my Xbox.do u just line it up on top of it?

 

i have alot more ?s,but i will get it all written down in 1 post.i'll do it later.Thanks every1.

Link to comment
Share on other sites

check out www.teamxecuter.com and www.xbox-scene.com

 

good tuts over there on soldering in the xecuter chips. I just ordered a new xecuter2.6 too I am tired of my matrix coming out of alignment.

direct link to tutotials

http://www.teamxecuter.com/x3/tutorials/x3pin1015.htm

it says 3.0 but it's the same for 2.6

 

soldering guide

http://www.epemag.com/solderfaq/pictures.htm

 

bios flashing tut

http://www.teamxecuter.com/flashbios/

Link to comment
Share on other sites

here is a good thread on the wire install on a 1.0 xbox over at xbox scene

http://forums.xbox-scene.com/index.php?sho....6+wire+install

 

here's another good tut

http://www.system-mods.com/guides/xecuter26/

with all that it should be pretty easy to get yourself up and running

Link to comment
Share on other sites

my solderless matrix comes out of alignment all the time. it used to be fine but lately it is really becoming a pain in the butt. I was thinking of putting the xecuter in with an xapt3r but my screw hole is alittle blown out from reinstalling the matrix and using a bigger screw :) so I am gonna wire install when my new chip arrives.

Link to comment
Share on other sites

i place the chip in on top of the filled iron an it lit up blue but looks like the d0 point is also filled what 2 do about this?

and the mod-chip has 3 plug joints- one i connected to the switch and there r 2 more a white an a red-do anything go in theme.i filled the red an white joint 1 side of the wire but the next end has no connecter just a end cut wire.

Link to comment
Share on other sites

i place the chip in on top of the filled iron an it lit up blue but looks like the d0 point is also filled what 2 do about this?

and the mod-chip has 3 plug joints- one i connected to the switch and there r 2 more a white an a red-do anything go in theme.i filled the red an white joint 1 side of the wire but the next end has no connecter just a end cut wire.

 

Please do not make double topics concerning the same subject.

We have merged your new topic into your original. Thank you. :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...