lawnspic
-
Posts
84 -
Joined
-
Last visited
Content Type
Profiles
Events
Forums
Blogs
Downloads
Posts posted by lawnspic
-
-
Just picked this up and it seems SNK coded there own emu for 1,2,X,3. Does anyone know if 4 and 5 are emulated, or are they ports?. I have 4 and 5 collection but thougt they were ports, and my Jap Mslug 3 seems like a port (who knows) I cant imagine them coding a Atomiswave emu for 6 though.
-
Hi, i was just playing ESP Ra.De. and when using 480p, and software filter high quality2x or simple 4x, the game comes to a crawl(massive slowdown) i usually use simple 2x and thats fine, though i did not try the rest. Also hardware is set to linear, all other settings are default
-
happy hunting!
-
Any chance on an update Prican or Thraxen?
-
Good news team xxx is back, thank the heavens Gogo(at least i think) is back on the job. New surreal and KIXXX
-
Prican thats what i have now, yours says 19 missing and mine 27, but that just the 8 dummy roms
-
The Rc report i have above is the most complete set as of now i think, only two games are not playable yet and the Sf games are just a dat error and should run fine from what Prican says but i have not tried it yet
-
You are missing 27 roms (4 games) of 12890 known FBA-XXX Pro roms (672 games)
jgokushi (all roms)
majjx.03 (00000000)
majj.03 (4614a3b2)
maj-simm.01c (ba0fe27b)
maj-simm.01d (2cd141bf)
maj-simm.01a (e29e4c26)
maj-simm.01b (7f68b88a)
maj-simm.03c (3aaeb90b)
maj-simm.03d (97894cea)
maj-simm.03a (ec737d9d)
maj-simm.03b (c23b6f22)
maj.01 (1fe8c213)
maj-simm.05a (4cb79672)
maj-simm.05b (e5f2e14a)
ms5pcb
268-p1r.bin (fc4e18b6)
268-p2r.bin (216b559a)
268-c1.bin (00000000)
268-c2.bin (00000000)
268-c3.bin (00000000)
268-c4.bin (00000000)
268-bios.bin (00000000)
ssf2tb
ssfex.5t (3ae42ff3)
ssfex.7t (4d51f760)
ssf2tbr1
ssfex.3t (00000000)
ssfex.4t (00000000)
ssfex.5t (3ae42ff3)
ssfex.6t (00000000)
ssfex.7t (4d51f760)
Prican i picked up another update in the usual places and just over wrote my exisiting roms and cleaned up some names. This is my new report and i think this is complete givin that one rom is not available and ms5 is not complete and the other two are a dat error. Is you 1.12 update correct? because the on i grabbed has more update roms in the pack
-
no, shouldn't be that much missing
i'm making the par2's for the romset to be at v1.12, should be going up in 3 hours or so.
all i did is put your update roms in my set and overwite the old ones, then fixed the set and this is what have. did i do something wrong? I did have a complete set except for jgokushi since 1.10
-
You are missing 51 roms (12 games) of 12890 known FBA-XXX Pro roms (672 games)
jgokushi (all roms)
majjx.03 (00000000)
majj.03 (4614a3b2)
maj-simm.01c (ba0fe27b)
maj-simm.01d (2cd141bf)
maj-simm.01a (e29e4c26)
maj-simm.01b (7f68b88a)
maj-simm.03c (3aaeb90b)
maj-simm.03d (97894cea)
maj-simm.03a (ec737d9d)
maj-simm.03b (c23b6f22)
maj.01 (1fe8c213)
maj-simm.05a (4cb79672)
maj-simm.05b (e5f2e14a)
ms5pcb
268-p1r.bin (fc4e18b6)
268-p2r.bin (216b559a)
pnyaa
267-ep1.bin (112fe2c0)
267-c2.bin (4edfa720)
267-m1_decrypted.bin (d58eaa8e)
267-m1.bin (c7853ccd)
267-v1.bin (e2e8e917)
pnyaad
samsho5
270-p1.bin (4a2a09e6)
270-p2.bin (e0c74c85)
270-c1.bin (14ffffac)
270-c2.bin (401f7299)
270-c3.bin (838f0260)
270-c4.bin (041560a5)
270-c5.bin (bd30b52d)
270-c6.bin (86a69c70)
270-c7.bin (d28fbc3c)
270-c8.bin (02c530a6)
270-m1.bin (49c9901a)
270-v1.bin (62e434eb)
270-v2.bin (180f3c9a)
samsho5d
samsho5h
ssf2tb
ssfex.5t (3ae42ff3)
ssfex.7t (4d51f760)
ssf2tbr1
ssfex.5t (3ae42ff3)
ssfex.7t (4d51f760)
svc
269-p1.bin (38e2005e)
269-p2.bin (6d13797c)
269-c1r.bin (887b4068)
269-c2r.bin (4e8903e4)
269-c3r.bin (7d9c55b0)
269-c4r.bin (8acb5bb6)
269-c5r.bin (097a4157)
269-c6r.bin (e19df344)
269-c7r.bin (d8f0340b)
269-c8r.bin (2570b71b)
svcd
svcplus
svc-p1p.bin (a194d842)
svc-p2p.bin (50c0e2b7)
svc-p3p.bin (58cdc293)
svc-s1p.bin (73344711)
Prican this is what i have after your update, since 1.10 i had everything except jgokushi. Is this correct ?
-
Kawa-x is an excellent emulator to this day, but now that Fbaxxx has been improved greatly it is my choice for neo geo. The biggest draw for me is the cpu overclock in fbaxxx, it works out alot of slowdowns on some of those neo games, but i will admit Kawa has good speed considering its age. Kawa x also has very good sound emulation, untill not very long ago that was no the case with fbaxxx. All in all both are very good coded emu's. As far as mame, its got variety, but cannot match the cps1-2 and neo emulation of these cpu specific emu's. Check out Mr.X thread and hopefully Thraxen is still hosting that patch, alot of other games are supported in it to(progear, pnya,ect.) I can dig it up if not.
-
Off topic- Prican or anyone else have bandwidth limitations with Giganews for active accounts? I went from 1.5mbps to less than half 600kbps thats BS, i sent them a message regaarding this do to other complaints.
-
+T+ thanks for looking into the controller lag issue, i trust you judgment, Thanks
Prican are you gonna do an update soon on news groups?
-
the d pad, i think it would be almost impossible to tell with the analog, unless the slightest movement had result. There is always a little play with sticks. but if you can tighten up the stick that would be great to
-
ok, thanks
-
ok Brit, so what you are saying is when force vmm is set to off in options the game uses the text file. If thats the case i will try your settings and play around, great job by the way. Many thanks
-
cyvern wont boot for me unless i set force vmm to on in the options
-
+T+ i have to address this again, i have just started messing with mamedox again with the release of the platinum pack(awesome by the way) and noticed still the slight control lag in the shmups in the others category as well some cps1 and neo shmups. I dont notice this much with other games though(maybe harder to tell) Mameox does not have this problem no matter what build (dox, 128plus, ect.) I bugged GoGo about this a year ago but maybe he forgot. Two good examples are DoDonpachi, and Battle Garregga, play them on each emu and you will notice. Can the controls be made more responsive? Thank you
-
no, cyvern runs fine w/vmm on, but it will not work without it and samsho will only run without vmm. i assumed all the games would run fine without the vmm at all like you said.Thanks
I'm running a 1.1 xbox with a Samsung 616T, WD 120 GB HDD, and a Xenium(pin header install) with the latest OS and A choice of bios (Ind bios, X2, M8plus, ect)
-
samsh5sp 8 16 65535
cyvern 4 22 65535
copy and paste straight from the vmm text file, also i did not replace the save files for the T and U data on E: because i just installed it right before playing and discovering the issues
Oh yeah im playing from hd, just to avoid confusion w/plenty room to spare
-
i have a 120 gb wd drive, also samsho5sp wont work unless vmm is off
-
Britney this package is awesome, thank you very much. I have one question is it ok to turn the VMM on in the options(its off by default) i did not want to change anything because i assume all was set by you. I did notice that Cyvern will not run. Thanks again
-
+T+ why does the emu say that ms5-m1.bin should be 128k instead of 256k in ms5plus, and is there a patch to fix it?
-
I'm running a 1.1 xbox with a Samsung 616T, WD 120 GB HDD, and a Xenium(pin header install) with the latest OS and A choice of bios (Ind bios, X2, M8plus, ect)
Ketsui project over at Shmups.com
in Arcade Emulators [/pc/arcade]
Posted
Some of the members over there are trying to muster up some cash to buy the PCB and have it dumped for near future emulation. Here is the link if anyone is interested
http://shmups.system11.org/viewtopic.php?t...&highlight=