Jump to content

DS2Key 0.5b3


sypherce

Recommended Posts

Attached below is a test version of DS2Key. This version is similar to 0.3 except I've used the wifi_lib version 0.3 which means it has DHCP, WEP, etc. Hopefully in a day or two I get a test version of the server made, I'll update here until I'm ready to release a completed version.

 

For now, those of you that want to test, please tell me of your troubles getting this version to work. Tell me if anything is working better or worse then in previous versions. Also feel free to contact me privately.

 

Edit:

I finished a pc server similar to the 0.11 (its console based), except it has mouse support.

 

Edit #2:

Added support for multiple DS Clients for one Server. Depends on profiles, which are named DS2Key.p#.ini, and the port # is stored in DS2Key.ini. Since everything is in a.ini file you don't need to run the.bat file, just the.exe.

 

ds2keyBeta1.zip

ds2keyBeta2.zip

ds2key0.5b3.zip

 

 

Note:

If anyone would like to make a external GUI for the pc side, preferably in perl, please contact me (Nxg, would you be able to?)

Edited by sypherce
Link to comment
Share on other sites

  • Replies 27
  • Created
  • Last Reply

Top Posters In This Topic

I did a quick run of Beta 1 with VBA and it ran great. I use WEP on my network and it didn't slow it down at all. I used my Nintendo WFC settings and it accessed the DHCP server just fine. The only problem i found was that it would load up the IP of the DS into the client software instead of the host PC, but I'd assume that this was planned. I'll try beta 2 if i can figure out how to get the bat and exe going.

 

Thanks for the update! :)

Link to comment
Share on other sites

  • 2 weeks later...

Just making sure everyone notices the new beta. Here's what I added into the original post:

 

Edit #2:

Added support for multiple DS Clients for one Server. Depends on profiles, which are named DS2Key.p#.ini, and the port # is stored in DS2Key.ini. Since everything is in a.ini file you don't need to run the.bat file, just the.exe.

Note:

If anyone would like to make a external GUI for the pc side, preferably in perl, please contact me (Nxg, would you be able to?)

 

Grab the download in the original post! Feedback is greatly apreciated!

Link to comment
Share on other sites

  • 2 weeks later...

I seem to be having a bit of a problem getting this to work. When I have my ds set to use the Official USB adapter and the official drivers, DS2Key will run but I can't connect to my computer. If I use the unofficial settings involving a SoftAP, the program freezes at the message "Waiting for ARM7 to init.." during boot-up.

 

Any ideas why this is happening and how I can fix it?

 

I would appreciate any help/advice received.

Edited by knux896
Link to comment
Share on other sites

I seem to be having a bit of a problem getting this to work. When I have my ds set to use the Official USB adapter and the official drivers, DS2Key will run but I can't connect to my computer. If I use the unofficial settings involving a SoftAP, the program freezes at the message "Waiting for ARM7 to init.." during boot-up. 

 

Any ideas why this is happening and how I can fix it? 

 

I would appreciate any help/advice received.

 

Can I ask what device your using to boot up DS2Key? With my Supercard CF I've gotten that freeze only when first turning on DS2Key, but loading the wrong format. Supercard's require homebrew to use the .ds.gba renamed to .nds...

Link to comment
Share on other sites

I am using the Max Media Dock. It doesn't seem to be a problem with the device though because it boots if my ds is set to use the official nintendo adapter, but not when it's set for an access point.

Edited by knux896
Link to comment
Share on other sites

If anyone would like to make a external GUI for the pc side, preferably in perl, please contact me (Nxg, would you be able to?)

 

I'd like to work on it, but I don't know perl. I'd be writing it in C#. Even if it's not the official GUI I'm still interested. Could you put something together about the communication between the client/server?

 

Thanks.

Link to comment
Share on other sites

Superb job! :clapping: I haven't had a problem with it on my regular computer using WEP and a Phat DS w/ flashme+GBAMP or DS Lite w/ passcard3+M3CF. I also ran 2 instances on my computer with seperate ports, one acting as mouse, the other as gamepad and worked flawlessly.

 

One suggestion though, on the PC exe, it would be nice if we could have a minimise to taskbar button or minimise to Taskbar on startup option (cause on my media center computer, it freezes the window if you try to close it with the DS... :( )

 

I mainly use it for SNES emulation on the media center, or to control the mouse for updates so I don't have ungodly amounts of wires coming out of it. I can't stress how awesome you are. :devilboy:

Edited by phlanx
Link to comment
Share on other sites

Works great. Even with two DSs. I noticed that the mouse code is completely different, but it moves the mouse according to the position on the touch screen. Is it possible to make the mouse function like a laptop touch pad? There's also lag when using mouse and buttons at the same time.

 

I figured out why my DS kept disconnecting, it's because I was using DSOrganize to boot DS2key. I've notified the author of DSOrganize about the little bug.

http://youngmx.com/forums/viewtopic.php?t=281

 

Can't wait for the GUI version, as editing INI files for the control is annoying. But this is only a beta...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...