Here's the newest release, I added "Touch Mouse" (mouse support). Also added some other stuff, check the version info as follows. Please refer to the readme.txt file for more information. Please send any bug reports, questions, or suggestions to sypherce@gmail.com.

»» Click to view attachment
»» DS2Key Archives
---
Version Info
---
0.3 "The Rusty Bagel" (02.10.06)
PC Side
- Revamped nearly everything.
- Added Profile support.
- Fixed most bugs from previous versions.

DS Side
- Added the Touch-Mouse! (Incomplete)
- DS2Key will now remember your WiFi settings.


sypherce@gmail.com

This latest version, I can't use the stylus at all.

I'm glad to hear (if limited) but mouse control.

I'd love to test it, but I cant figure out why I cant load the app (It loads fine, I'm using an M3 CF, without any loaders (ndsloader.bin), the app freezes when pressing A to load, but loads fine with Start. v0.2 had the same problem, but i COULD use the touchscreen back then )

Well. I could load it fine.. But I couldn't find any AP.
Just a blank list.
Using a GBAMP.

BTW, I've been toying around the profiles and stuff, even though I cant get this thing to work and I must admit I am impressed!

The profiles idea is great.

And even if I cant configure the settings at all, the option to store settings is very nice as well.

Where does it freeze exactly? Is it after the top screen displays "Do ConfigureWifi"? If so I believe your the.sav file is either missing, unreachable, or not named similar to your.nds/.ds.gba.

Is your AP sending out a SSID? Check with the original WifiLib demo to see if you can get an SSID on the list.

WifiLib

Yeah, I get mine instantly on the test.

Well, it freezes when it first loads, if I press A.

Meanwhile, If I press Start to load, it does load the whole thing, I can move around with arrows and press A and B, however ALL touchscreen capability is completely disabled.

I'm not talking about certain areas being hard to hit, im talking about trying every single spot, and not being able to respond. However, moving the Dpad or pressing A or B does make teh app respond.

The.sav file was stored at both the root folder and the ndssave folder.

What is the filename of your.sav file?
I don't know how the M3 CF needs the.sav to be, but it should
work with the name "ds2key.ds.sav" or "ds2key.sav" depending
and needs to be in the same folder (but no warranty with that).

Great new version!
This one actually has winamp-controls that work for me which 0.2 didnt

May be you did put in the wrong commands like using upper case 'W'
instead of the lower case that was needed.

I can't find any access points, not even in Wardriving. It just shows an empty list.

Edit: Using a GBAMP.

Loading with GBAMP, I can't find an access point. With Supercard CF, nothing works at all.

It would be helpful to know if that also
happens with the Wifilib Demo with the GBAMP.
[edit]Which of the files did you use? The.ds.gba
or the one with.nds, if it works it should with the
.ds.gba (but I don't own a GBAMP so I don't know
and can't check it either).[/edit]

DS2Key used to work for me before, but this version doesn't. I haven't had any problems with any of the other wifi apps.

That's because of.sav file, the GBAMP wasn't made
for a use like this, and I don't think it can handle
save files. Previous versions of ds2key didn't support
save, and it seems that is the cause of the problem.
You'll need for another version of ds2key, or may be
a fixed version (sypherce is working on that).

I have a GBAMPv2 and I've used all the other DS2KEYS have to say freakin' SWEET!!! Anyway so this version seems to load up fine and all but as everyone seems to be saying when you search for an AP you get nothing... Which is infact Wrong totally if you scroll down on the screen and keep going access points actually show up. When you click on one the WEP is [DHCP I] and the TCP/IP: says [ASSOCSTATUS_CANNOTCONN] AS THOUGH IT WOULD IN THE CONNECTION SEQUENCE. sO i FIXED THOSE THINGS (whoops CAPS....)fine to there normal should be settings and if i try to connect without changing and "Number(ip,DNS, blah blah)" settings it says it connects. further testing came to show i can change all the setting Accept the IP address and i could still connect but i could still ONLY connect after the UDP screen the bottom is just black. But when i DO change the IP address from something other then 0.0.0.0 then when i goto connect it just says 0.0.0.0 and scrolls everything off the screen just stays full of 0.0.0.0 over and over wierd huh? thats what i've got so far in the testing i've done any help or fixes or does this help any?
Also in the Wardriving on the new version I do see all wireless connections fine.

After reading Kayouu's post I started DS2Key and.... still nothing.

What r u using to boot it up and did you try to scroll with the touch screen and buttons cause both work for scrolling down and i just keep scrolling down for a little while and there at the bottom instead of the top dunno whats with that but... thats how it is on my gbamp.

Well, like I sad in my post before, it doesn't work
for a GBAMP due to the lack of SRAM, I don't think
that the Replacement FW has anything built in for
save data (correct me if this is false). The newest version of ds2key uses
the data in the save file to connect to an AP.
I don't have a idea where the other errors come
from, but may be I buy me a GBAMP to test it
myself.

Btw. Kayouu, I didn't really get from your post if it
worked for you in the end or not.

No because when I tried any IP for the IP, anything besides 0.0.0.0 would only show that repeated on the screen when I tried to connect with it.

yay thats a great version.
i dont think a mouse is needed.
ds2key should be just an DS@gamepad homebrew app

I finally got this thing to work.

The mouse works, but the sensibility is a bit odd.

There should be a way to adjust sensibility...

Great job btw, the app is greatly improving!

what if I could maybe put the correctely moddified sav file on a GBA cart... maybe load with the GBAMP and then put in the normal gba card in that has the sav on it think that might work. just a thought...

I also tried it on a GBAMP and did not get an AP either. I did get it in previous versions, but not this one. I hope you guys can (and will ) fix it so I can test it .

Just one question, how can the sav file have impact on searching for an AP? As far as I can see it should only contain saved information of a formerly searched (or connected) AP. The searching should just be done like it used to, but please tell me if i'm wrong .

And... I tried to edit the sav file manually, but I have no idea how this thing is loaded. Now I noticed the file is exactly 64kb, so I figured that simply means it needs to be exactly 64kb. Now if I would have to figure out what figures do what (I think I know the subnet mask though ) and what I should change in what to make the file readable. So this would be kind of hoping I guess it right so I did not even try it (well, once ).

Even if there would be data in the save file,
DS2Key reads from sram, but can't find any so
it won't get anything (if it doesn't crash).
You have to wait for sypherce to implement
GBAMP support.

Why does no one else get any AP when they search with the GBAMP... I do on mine but like I said at first it seems that I get none but I keep scrolling down and there at the bottom why does this only happen for meare you other GBAMP users advanced or beginners on homebrew stuff....

That still shouldn't affect the search for APs.

That depends on what you call advanced. I do test about all the homebrew things I can get my hands on. I just don't write any, but I think I will . Now I did follow your instructions of keeping to scroll but I do not see anything. Now if I try an older version I do see something. Adding to that, even if you have to scroll down this would be a bug, which would need to be solved.

if all else fails, manual setup, pay attention to hyow you set your network up and it is easy as hell

Well it's not directly connected to the problem,
but it seems to be connected with using the
GBAMP. We can't make troubleshooting with
a GBAMP because we don't have one. But I
ordered one and it should get to me in the
next week.

If you need any help from me I'm great to help me lots of free time... anyway hit me up if I could help in anyway.